Hi, welcome to HOT. You requested a review of your mappings. They look quite good, as to position (tracing the footprint outline) as shape. Although i noticed some buildings do not have the square corners they should have (i also looked to changeset/119450640). So please keep paying attention to that. And please keep mapping. Thanks and regards, Martien, validator.
---

Published using OSMCha: https://osmcha.org/changesets/119449677

Hi, welcome to HOT. I am a validator and noticed these buildings you mapped. You traced it quite well. However there are a few issues. You mapped this group of buildings as one building. Zooming in it is more likely that they should be mapped as 3 separate buildings. Also the building that touches the other building shares a node. Please avoid letting buildings share nodes with neighboring features (buildings, but also roads or waterways). And always pay good attention to the squaring of your buildings. Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator. Please keep mapping.
---

Published using OSMCha: https://osmcha.org/changesets/119470941

Hi, welcome to HOT. You asked for a review. You mapped a lake here. Although the tracing is ok it is better to stick to buildings here in this project. This makes validation easier and will help the project be finished earlier (it is an urgent project meant to be finished within a week). Thanks and please keep mapping. Regards, Martien, HOT global validator.
---

Published using OSMCha: https://osmcha.org/changesets/119395944

Hi, welcome to HOT. These buildings look good as to shape (square corners) and position. Well done and thanks. Please keep mapping. Regards, Martien, HOT global validator.
---

Published using OSMCha: https://osmcha.org/changesets/119397594

Hi, welcome to HOT. You asked for a review of your mappings. The buildings look good as to shape (square corners) and position. Also good to fix up buildings mapped by others. Take care not to let buildings cross other features like eg a barrier. I also noticed a few buildings tagged as house. Rule of thumb though in HOTOSM is to always tag building=yes, and let local mappers decide what the building actually is. Also, if possible, try not to delete mapped buildings done by others. If possible move them to an unmapped one. But in general, good work here, please carry on. Thanks for your time and effort. Regards, Martien, global validator.
---

Published using OSMCha: https://osmcha.org/changesets/119317240

Hi nataliasalinas, thanks for mapping and welcome to HOT. I am a validator and looked at several of your mappings (as i always do with new mappers).

Keep paying attention to the squarness of the corners. Always draw buildings as square as you can. Then add the Building feature type. And last, right click it and click the square icon.

Take good care not to let buildings share nodes with other buildings or with eg roads. You can reach that by precisely tracing roads and buildings.

And btw, you removed several buildings, maybe because these were not present on the imagery. But be carefull with that, it could be seen as vandalism. Better leave them and make a note in the task comment so that a more experienced mapper can look at it.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/119126355

Hi, you requested a review of your mappings. The buildings you mapped are well done as to their location. But keep paying attention to the squareness of the corners (although several are well mapped in this respect). Always draw buildings as square as you can. Then add the Building feature type. And last, right click it and click the square icon. And btw, please stick to the required features to be mapped, here buildings and highways.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/119125303

Hi Brooke, welcome to HOT.

You added quite a lot of tags to an existing road here. Eg layer, maxspeed, oneway and so forth. As a HOT mapper you are only supposed to add a basic tag, eg highway=residential. That will suffice, local mappers will add more details later on. Please stick to this rule. Thanks for your cooperation.
---

Published using OSMCha: https://osmcha.org/changesets/118217227

Hi, you mapped several buildings here without tagging them as building=yes. Besides that, pay attention to the squarness of the corners. Always draw buildings as square as you can. And of course your mapping should match the outline of the building on the imagery.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ
---

Published using OSMCha: https://osmcha.org/changesets/118257397

Hi,welcome to HOTOSM. You requested a review of your mappings. I noticed you mapped a lot of buildings on top of already mapped buildings. It almost seems if you are tracing them over the existing ones. This is not good. It will damage the map and possible endanger the people on the ground who depend on these maps. So please only map buildings where there are none existent. Thanks for your cooperation. Regards, Martien, HOTOSM validator.
---

Published using OSMCha: https://osmcha.org/changesets/118217381

You have been blocked by OSM for vandalism some time ago. The block has been lifted now, but i notice here that you started again. Please stop or you risk another block. Thanks.
---

Published using OSMCha: https://osmcha.org/changesets/116974614

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings. The buildings you mapped are well done. The only issue is with the surrounding residential area. It shares a node with a building, while it shouldn't. So always pay attention when drawing these and to keep a gap between their edges.

Thanks so much for your contribution, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/117345942

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings. The buildings you mapped are well done as to the location. But pay attention to the squarness of the corners. Always draw buildings as square as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch this short video for more info:
https://www.youtube.com/watch?v=Xs5wX592E1o

Thanks so much for your contribution, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/117361744

Hi, thanks for mapping. You requested a review of your mappings. The buildings are well mapped. Good location and outline. Thanks and regards, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/117362230

Hi, thanks for mapping. You requested a review of your mappings. The buildings are well mapped. Good location and outline. Thanks and regards, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/117326354

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings. The buildings you mapped are well done as to the location. But pay attention to the squarness of the corners. Always draw buildings as square as you can. Then add the Building feature type. And last, right click it and click the square icon. Then you are good. Thanks and regards, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/117330938

Hi Sillililli, thanks for mapping and welcome to HOT. You requested a review of your mappings. I think you misunderstood the instructions. You should free draw a closed line around a group of buildings with the attribute landuse=residential. Then map the individual buildings as building=yes (let them not cross the residential border). And place a node in the middle of the group with the attribute place=hamlet or place=village. Thanks and regards, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/117298830

Hi Demetrios, thanks for mapping and welcome to HOT. You requested a review of your mappings. The building you mapped is well done as to the location. But pay attention to the squarness of the corners. Always map buildings as square as you can. Then add the Building feature type. And last, right click it and click the square icon. Then you are good. Thanks and regards, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/117299412

Hi youngmapper, thanks for mapping. Unfortunately, there are a few issues here. You mapped a road, but forgot to assign a tag to it. Some buildings are tagged as building=building, they should be building=yes. Also, please pay attention to the squarness of their corners. Fortunately, there are also buildings that are mapped well. Thanks and regards, Martien HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/117297909

Hi MBSage, waterways run always towards a bigger stream. You mapped 2 of them running the other way round. Also one of them doesn't connect to the bigger waterway.
As to the buildings, please keep an eye on the squarness of the corners. But besides that, they are all well placed. Thanks and please keep mapping.
---

Published using OSMCha: https://osmcha.org/changesets/117209036