Hi, thanks for mapping. I am validating this project.

Unfortunately i found a few issues here.

Please avoid mapping several buildings as one building. Every building must be traced separately.

Also please avoid buildings sharing nodes or else overlapping

This area contains several tall buildings where also part of the walls is visible. In that situation you should trace the roof outline and then move that outline to the building footprint. See for more info: https://www.youtube.com/watch?v=JAPiGntG6fs

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/132314541

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location.

Allow me to give some tips on improving your mappings:
- avoid mapping several buildings as one building. Every building must be traced separately. The humanitarian teams use the size of the buildings to estimate the number of people living there.
- avoid buildings sharing nodes or else overlapping, eg with roads
- pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/132210868

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location.

Allow me to give some tips on improving your mappings:
- avoid buildings sharing nodes or else overlapping, eg with roads
- pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/132201467

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location.

Allow me to give some tips on improving your mappings:
- avoid mapping several buildings as one building. Every building must be traced separately. The humanitarian teams use the size of the buildings to estimate the number of people living there.
- avoid buildings sharing nodes or else overlapping, eg with roads
- pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/132206236

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location.

Allow me to give some tips on improving your mappings:
- avoid mapping several buildings as one building. Every building must be traced separately. The humanitarian teams use the size of the buildings to estimate the number of people living there.
- avoid buildings sharing nodes or else overlapping, eg with roads
- pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/132177119

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location.

Allow me to give some tips on improving your mappings:
- avoid buildings sharing nodes or else overlapping. If buildings need to be adjusted or improved later on, it is much harder to do that if they share nodes with nearby features
- pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/132206093

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location.

Allow me to give some tips on improving your mappings:
- avoid mapping several buildings as one building. Every building must be traced separately. The humanitarian teams use the size of the buildings to estimate the number of people living there.
- avoid buildings sharing nodes or else overlapping
- pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/132207008

Hi, thanks for mapping and welcome to HOT.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

You also forgot to give the buildings the tag building=yes.

Please watch this short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/131245253

Hi, thanks for mapping. You requested a review of your mappings.

The buildings you mapped are well done as to their location and tracing. But pay attention to the tagging. I notice you tag buildings as house, residential, garage etc. But as remote mappers we cannot exactly know what the function of the building is. So we always tag building=yes. Please stick to that. Unless you have local knowledge of course.

Thanks so much for your contribution, Martien, HOT validator.
---

Published using OSMCha: https://osmcha.org/changesets/131350223

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Also please avoid buildings sharing nodes with each other or with roads.

Please watch this short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/131424664

Hashtag is incorrect, should be #hotosm-project-13620 #hurricanejulia

Hashtag is incorrect, should be #hotosm-project-13620 #hurricanejulia

Hashtag is incorrect, should be #hotosm-project-13620 #hurricanejulia

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

You tag buildings as landuse=residential. They should be tagged as building=yes though. Please take care of that in your future mappings.

Also please pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/129319785

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

Several buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Also please avoid mapping multiple buildings as one building. Every building must be traced separately.

And please avoid buildings sharing nodes or else overlapping.

Please watch this short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/129374648

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

Several buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Also please avoid mapping multiple buildings as one building. Every building must be traced separately.

And please avoid buildings sharing nodes or else overlapping.

Please watch this short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/129374775

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

Several buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Also please avoid mapping multiple buildings as one building. Every building must be traced separately.

And please avoid buildings sharing nodes or else overlapping.

Please watch this short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/129375015

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

Several buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Also please avoid mapping multiple buildings as one building. Every building must be traced separately.

And please avoid buildings sharing nodes or else overlapping.

Please watch this short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/129375061

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/129375282

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

Several buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Also please avoid mapping buildings as one building. Every building must be traced separately. And please avoid buildings sharing nodes or else overlapping.

Please watch this short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/129202041