Zdravim, "pismenkova variacia" bola spravne zapisana v znacke local_ref. Nema sa zapisovat do znacky 'name'.

Zdravim, pride mi divne, ze v JOSM sa Vam podarilo tak poskodit relacie MHD: https://tools.geofabrik.de/osmi/?view=pubtrans_routes&lon=18.11888&lat=48.30866&zoom=13&baselayer=Geofabrik%20Standard&overlays=ptv2_routes_invalid%2Cptv2_error_ways%2Cptv2_error_nodes . JOSM by mal vediet rozseknute cesty vlozit do relacii v spravnom poradi a teda zachovat logiku. To iD robi somariny a preusporiadava cleny ako sa mu zachce. Viete si spomenut ako ste to robili? Mali ste v JOSM nacitane len cesty a nie relacie, v ktorych su clenmi?

Dobre, dakujem. Zastavku treba do relacie MHD umiestnit na spravne miesto trasy, nie na koniec.
Tiez povodny bod zastavky mohol zostat ako oznacenie kde je pristresok.
Obe som opravil.

No neviem, budova way/26409901 sa nevola cela TS888 (len transformator na boku). amenity=cafe ste nechali ale zrusili nazov a ostatne udaje? Nazov tam dodnes je, ale ze by nefungovala? Na dverach otvaracie hodiny nema, ale na stranke ano.

Hi, just because you didn't find a housenumber on the building it does not mean it has none. If you read the 'fixme' tag you would know we actually have multiple to choose from here, from official sources.

So please do not make up false information.

Ano, ja som ten most prave obnovil, len zablokoval cez access=no, kedze tam fyzicky je. Vy ste ho zmenili na barrier=yes, cim prestal byt mostom.
Ale teraz hovorim uplne o inom, o bode node/7968602529, ktory je na ceste do dvora.

Tak tu cyklocestu ako way/172636950 pozdlz Dvojkriznej ste si dobre vymysleli. Fakt kvalitne vyriesenie "fixme". Je to tam uplne inak. Nie su tam ziadne oddelene cesty, vsade idu cyklisti po chodniku, alebo v pruhu po ceste. Takze tieto separovane cyklocesty ste mali odstranit a prislusne upravit chodniky a cesty. Pritom na tej ulici uz cycleway=lane je, takze cele tieto paralelne ciary su zbytocne.

node/7968602529 ne ma byt noexit=yes, je tam pradsa brana a niektori ludia mozu pokracovat. Davajte noexit=yes len na konce ciest, kde uz naozaj nikto nemoze ist oficialne dalej po viditelnej ceste.

Dakujem. Opravil som to aj tie linky MHD.

Zdravim, naozaj je na priechode way/1428223092 znacenie aj pre cyklistov? Alebo je to obycajna zebra pre chodcov?

Super, dakujem

Dakujem. Ktory most je "stary"a zatvoreny? Ten novy docasny juznejsie od povodneho mosta?

Zdravim, podla webstranky skola je len na 2.poschodi, nezabera celu budovu. A tiez zmenou na building=school (pritom to vyzera ako obytny dom, ziadna skola), skolu nevyrobite. Chyba Vam amenity=school.

Opravil som.

Hi, what is this shop? Maybe it is of the brand Rajo, not Raya? Also I really doubt it has all those English and Russian names written on it.
Are you sure it is a convenience shop (sells all kinds of basic foods)? Maybe it sells milk products only and then it would be shop=dairy.

Zdravim, node/26860830 naozaj kapacita 15000? To vyzera ako dost vela. Da sa to niekde preverit?

Neviem ako to ten Inspire robi, avsak tu su zase poposuvane budovy, ale systematicky jednym smerom (na vychod), takze tam bude nejaka principialna chyba. Nesedi im to ani na Ortofoto z roku 2020 (ktoru ste tu zrejme pouzivali), ani na kataster, takze neviem odkial to beru. Ked ste teda ale porovnavalli 4 zdroje, pride mi to zvlastne, ze je to tak posunute. Ale ktovie co bolo v roku 2022.

It is OK, if you want to outline the thickest part of the building, but it must be positioned where it is on the ground (or where it vertically projects onto the ground), not where its roof is shown on the aerial imagery, which is taken a bit from the side (rarely from exactly above the building). So tall buildings are always slanted or skewed to the side and you must take this into account, cross check with neighbouring buildings or with the cadastre map, which has the buildings properly positioned.
I will fix this.

Thank you for trying to fix building problems. However, shifting all the building parts was unnecessary to solve the problem. Do not touch buildings with source=kapor2 or source=ZBGIS if you do not use that source to cross-check your changes.

Hi, what intersection are you fixing here? It seems there was just a node needed to connect the building parts together.

The shifting of the buildings was totally unnecessary and incorrect, they were sourced from the Slovak cadastre and were correct. Also the shape of building 1998 was correct before your change. Why are you drawing features that are on the roof of the building (the extrusion on the western side)?

public_transport=platform je akoze nova znacka, ktora nahradza highway=platform, ale vykreslovace ju velmi nepodporuju. Pouziva sa ale na vyjadrenie autobusovej zastavky v relaciach MHD, t.j. je to miesto kde cakaju ludia. Vo Vasom pripade by aj na tej ciare to mohlo byt, ale nie ked uz je zastavka vyjadrena aj bodom vedla. Tak bud ten bod zrusit a vsetky jeho znacky preniest na tu ciaru (a aj ju nahradit v relaciach autobusov), alebo ked maju zostat obe, tak nech nemaju obe public_transport=platform . Je to duplikacia zastavky. Javi sa potom ze su tam dve, aj ked je tam len 1. Ano, ta vas nema highway=bus_stop, ale to je tiez starsia znacka, od ktorej sa ma upustit (ale stale ma velku podporu vykreslovacov). Cize z kazdej novej aj starej znacky by mal byt len 1 exemplar na 1 zastavku.