I have fixed it.
For how it was broken the route ways were not in sequence. See @Warin61/diary/45106

I keep an eye on 2 bus routes I entered. Because they may not have changed for some period of time does not mean they are 'unmaintained'.

Hi,

This has broken the bus route relation/3331347 No 711

Hi,
The relationship 15509013 Vibrance Studios is wrong - the inner way touches the outer. It would have been better left as it was -a simple way. Do you want me to fix this?

Hi
The community garden would include the veg etc plots???

The "name' Vegitables, Fruit ... well those are descriptions... see osm.wiki/Names#Name_is_the_name_only

Keep mapping.

Hi,
There is a problem with one of these houses... see https://tools.geofabrik.de/osmi/?view=areas&lon=151.08833&lat=-33.99812&zoom=19&baselayer=Geofabrik%20Standard&overlays=duplicate_node%2Csingle_node_in_way%2Cduplicate_segment%2Cway_in_multiple_rings%2Cintersection%2Cintersecting_segments%2Cring_not_closed%2Ctouching_rings%2Crole_should_be_inner%2Crole_should_be_outer%2Cinner_with_same_tags%2Cways%2Cduplicate_node%2Csingle_node_in_way%2Cduplicate_segment%2Cway_in_multiple_rings%2Cintersection%2Cintersecting_segments%2Cring_not_closed%2Ctouching_rings%2Crole_should_be_inner%2Crole_should_be_outer%2Cinner_with_same_tags%2Cways

The DCS Imagery gives better resolution than bing , and has better location accuracy too.

OK. I'll unname the track that the base map shows without a name.

I'll add the press reported name as 'loc_name=Clover Hill Trail' .. and call it 'good enough' :)

Hi,
Welcome to OSM!

Muiltpolygons are one of the harder things to understand. The one you have made here is not correct. see relation/15479996.

The firest meber way/871161920 encompasses the whole lake the other ways simply duplicate segments of this way. Best to keep the map as simple as possible, that would be done bt tagging way/871161920 as a lake, then deleting the other member ways in the relation and then the relation it self. \
For more info on multipolygon relations read the OSM wiki osm.wiki/Relation:multipolygon

Keep mapping .. lots to do.

I note that it has been 6 months since the introduction of the 'permission to use' this data on the Australian Data Catalog. Yet the 'permission' document remains missing. Suggest you spend time getting that done....

Hi,

Are you certain that this Rural Fire Brigade occupies both buildings?

Thanks.
I add the extras after the above message ..
I'll be checking the lot of NSW fire stations and brigades once I'm through doing this 'housekeeping' .. that will take a while. I'' make 2 lists of what OSM has and compare that with the official lists .. then I'll work on the discrepancies (both any missing and any extras).

Hi,
The DCS base map says that there are 2 Rural Fire Brigades here;
Oak Flats and Wollongong Headquarters...

But the DCS base map is confused - upto 4 Rural Fire Services here in this locality when zoomed out! So maybe these are in addition to your entries?????

Hi,
Bing shows water in Green Creek, where as in the DCS Imagery it looks bone dry. As it flows into a 'creek' then it cannot be a river? The problem is assign it as either a river or a stream ... after rain .. during flooding it would be a lake :) I'd stick with the name 'Creek' to suggest what the locals thought of it?

Good oh.

Dam! I missed that - just went straight to the long table under it . mutter mutter... !

Take your time, they have been unloved for a while. And yes, I approve of removing State Forests from National Parks - when the NPs are more upto date than the State Forests.

Hi,

These numbers you have added to th eend of the fire station names... they seem to be 'station numbers' and not part of the name? Possibly they would be better tagged as ref= x where x is the station number???
See https://www.fire.nsw.gov.au/station_list/

Hi,

The roles 'inner' and 'outer' are mixed up in relation/15406000 - 'outer' should be the outside of the building ..

Same thing in a different changeset of yours on relation/15405981 - water ... roles mixed up. See relation/15405981

Hi,
The 'Clover Hill Road' appears on the DCS Base Map. Yet the western ends are unnamed on the DCS Base Map but you have them named. Can you confirm that there are on the ground signs with the name?
Present press reports call it 'Clover Hill Trail'... probably reflecting the state of the road.

Hi,
Welcome to OSM!

There is a problem with relation/15452881 - meadow. It 'only' has inners - no outer way. See relation/15452881.
Always best to keep it simple? If these 'inners' are actually the meadows then delete the relation and place tags on these ways... ???

The DCS base map has two 'park' names to the west ... it is not very good at separating them... but it does define the 'park' or what ever the area is .. and those boundaries can be taken as the legal boundaries. Rock, trees and grass don't indicate legal boundaries, so I'd not use them when the DCS base map is available.

Note that the sea ward side is the hi tide mark for the coast .. don't move it, leave it alone and make new ways for stuff.

The Tanks could be place=islet for any bits above the hi tide .. that way they should render above the sea.