Hi GimmeMa,

Welcome to OSM and thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Please also habe a look at this page as you use StreetComplete:
osm.wiki/StreetComplete/FAQ#A_changeset_made_with_StreetComplete_covers_a_massive_area%2C_why_is_this%3F_How_can_it_be_prevented%3F

Hallo NationalparkSchwarzwald,

Die von dir bearbeitete Grenze teilte sich einen Punkt mit einer Bundesstraße. Beim verschönern der Grenze bzw Verschieben dieses Punkte hast du versehentlich ein Zickzack in die Bundesstraße eingebaut...

Ich habe den Knoten aufgetrennt und die Bundesstraße wieder begradigt:
changeset/141042944#map=16/48.5307/8.2175&layers=N

Ein schönes Beispiel, weshalb man Flächen (Park) nicht an Linien (Straße) heften sollte, dann passieren so Missgeschicke mal schnell :-)

Viele Grüße
Metzor

Hi Ar99,

Welcome to OSM and thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Hi Vierkantor,

Welcome to OSM and thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Please also habe a look at this page as you use StreetComplete:
osm.wiki/StreetComplete/FAQ#A_changeset_made_with_StreetComplete_covers_a_massive_area%2C_why_is_this%3F_How_can_it_be_prevented%3F

Hi Sander

Thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Maybe also have a look here:
osm.wiki/StreetComplete/FAQ#A_changeset_made_with_StreetComplete_covers_a_massive_area%2C_why_is_this%3F_How_can_it_be_prevented%3F

There is even a wiki page on this issue...
Seems to happen to the best 🤣

osm.wiki/StreetComplete/FAQ#A_changeset_made_with_StreetComplete_covers_a_massive_area%2C_why_is_this%3F_How_can_it_be_prevented%3F

Hallo dreiachtel,

Ich würde mich freuen, wenn du die geografische Größe deiner Uploads etwas kleiner halten würdest, siehe

osm.wiki/StreetComplete/FAQ#A_changeset_made_with_StreetComplete_covers_a_massive_area%2C_why_is_this%3F_How_can_it_be_prevented%3F

Und
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Danke :-)

Hi nobodyinperson,

Welcome to OSM and thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Hi Lantander,

(A late) Welcome to OSM and thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Hi Pandoril,

Welcome to OSM and thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Hi bn_1000,

Welcome to OSM and thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Hi Dewi Jonker,

Welcome to OSM and thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Hallo znaika,

Jetzt ist das routing im brouter richtig drin.
Danke fürs Reparieren :-)

Hi HV2023,

Welcome to OSM and thanks for contributing :-)

One general recommendation: changesets should be local.

To avoid conflicts and as a courtesy to reviewers, it is recommended to:

• combine changes in a small geographical area (within a city, district or province)

• keep changes within the same country

• upload/save changes before moving on to map in a different area

Why? Have a look at the section
"Geographical size of changesets" on this wiki page:
osm.wiki/Changeset

Thanks for considering, have a nice day and happy mapping!

Hi HarteKarte,

Die ausgewählten Wege in der Relation wären für "nur geradeaus" gültig. Diese gibt es aber ja schon und sehe ich auch auf mapillary-Bildern von 2017. Wurde das Schild auf ein Rechtsabbiegeverbot geändert? Dann müsste man die Relation hier so ändern, dass der (südliche) Kennerweg als (einziges) "to"-Mitglied drin steht und könnte dann die geradeaus-Relation löschen. Oder?

Wie kann ich eigentlich "siehe Foto in Kommentar hier" für mich sichtbar machen?
Viele Grüße
Metzor

Hi ticki_52,

Mir scheint, du hast in diesem Änderungssatz die uturn-Relation ausversehen kaputt gemacht:
V1 hatte from/via/to
V2 to/via/to

Habe es wieder zurück geändert und das überflüssige (und unvollständige) Linksabbiegeverbot gelöscht.

Hoffe, das war ok so und stimmt nun.

Viele Grüße
Metzor

Hallo Hunt4target,

Mir scheint, dir ist vor 2 Jahren ein kleiner Fehler unterlaufen...
Hast du den Blitzer unabsichtlich verschoben?
Oder nur die Reihenfolge der Straßenknoten nicht korrigiert?

node/2401791633/history

Ich wollte in Unkenntnis des Standortes nicht die Straße einfach begradigen. Magst du das fixen?

Gruß
Metzor

Hallo znaika,

Ich schreibe, weil brouter sich beschwert, dass man von Westen auf der L402 kommend die Auffahrt auf die A59 nicht über die "richtige" Fahrspur befahren kann.
So wie ich das sehe, liegt es an der "Nur geradeaus"-Relation
relation/16253212/history#map=19/51.09735/6.92721
Vermutlich wolltest du diese einen Knoten östlicher anlegen?

In der richtigen Reihenfolge hast du ja bereits eine Relation angelegt:
relation/16253218/history

Hier das routing:
https://brouter.de/brouter-web/#map=18/51.09738/6.92726/standard&lonlats=6.926735,51.097148;6.928055,51.097182&profile=car-eco

Ich kenne die Gegend nicht, vielleicht könntest du mal reinschauen?

Viele Grüße
Metzor

Hi,

thanks a lot :-)

Hallo kiradonner,

Mir scheint, du hast ausversehen zwei Knoten der L1100 verschoben:
* kurz vor der Auffahrt
* Brücke (grauer Hintergrund)

Vorher/nachher siehe z.B.hier:
https://resultmaps.neis-one.org/osm-change-viz?c=139504190#19/49.18397/9.20152

Könntest du das bitte reparieren?

Ist mir in Vespucci beim Hinundherwischen leider auch schon passiert. Das Schloss-Feature hilft ;-)

Viele Grüße
Metzor