Now show the distribution of circuits = 1 or circuits = 2.

Tag Info - "No English language description for this tag in the wiki." Overview - 2,585 uses, out of tens of millions of towers mapped. Chronology - is not used until Summer of 2020 (12 years after OSM started).

All these lines were mapped properly and tagged properly before these extra towers and the 1/3 tag was added. They add no value to the project, clutter maps and unnecessarily weight sections of lines.... similar to adding rail marshaling yards that do not exist to a rail line.

Talk about "double tagging".... that is exactly what you are doing with 3 phases for direction changes of 500KV and 750kV circuits.

Learn how substations are laid out with different voltage switchyards and transformers between them, and then you'll have less conflicts in your mapping.
This area is extremely complicated, doesn't follow rules & still needs more corrections... including 110kV mapped as 35kV erroneously. https://openinframap.org/#13.03/56.73856/36.77435

Why do you revert back to a natural setting that does not exist? A new power plant and the building it is enclosed in was built here by 2019... including racking to connect steam (district/process heat) pipes to the NEW paper factory and the existing chemical factory... both of which were targets of recent Ukrainian drone strikes. Are you blind and can't see it with satellite images showing construction starting in 2014?

Oh look, another location... two sets of three 500/220kV single phase transformers that are not detailed... but oh look every fucking "monopolar" tower and phase of the 500kV circuits are detailed!
https://openinframap.org/#14.8/52.77464/41.32336

Here is yet another, although only 1 set (3) single phase 500/220kV transformers....
https://openinframap.org/#15.98/53.125714/44.789327

Of course, I would correct/improve this location, if idiots like you wouldn't revert everything I do!!!

just one of dozens of this configuration, inside russia.... https://openinframap.org/#15.74/55.096104/43.94202 using two sets of three 500/220kV single phase transformers. This is the most common high voltage transformer configuration inside Russia & the UES.

I added the most common high voltage transformer in the UES to Konakovskaya TES... 500/220kV single phase, and you fucking revert the additions!!!

Why?

Because you are fucking moron!

You're a fucking idiot! You have no idea what was wrong with this build, can't be bothered to look at street view that verifies there is no 35kV in this high voltage station and that it is as I rebuilt it.
Fucking moron with no fucking idea what is going on!

Great job, thanks!

But don't let press releases or satellite images with the new Combined Cycle Power Plant clearly visible on them stop you for exerting your control to revert any additions/changes.

https://www.gem.wiki/Alexin_power_station

https://neftegaz.ru/news/energy/450339-a-inyutsin-prinyal-uchastie-v-torzhestvennoy-tseremonii-vvoda-v-ekspluatatsiyu-pgu-115-mvt-aleksinsk/

Look at this and tell me each circuit having "3x weighting" is in any way correct?

And for what, because someone needs to map every tower individually. When do we start mapping the 2 tower feet of an H-Tower, or the 4 feet of lattice towers.

There is no reason to map all 3 monopolar towers and the individual phases.

https://openinframap.org/#13.51/56.4823/38.20536

No one maps high voltage circuits, seperating out single phases and noting as "1/3" except for the group of editors working around Moscow & Russia.

The 3 towers are one functional unit, no differently than th e power line with all 3 of its phases is a single functional unit.

Now you have reverted all my corrections to this flawed/incorrect and non-electric grid industry standard editors have adopted for themselves on OSM.

see the wiki on monopolar or guyed monopolar...

design=*#Towers_or_pylons

Mostly used as an anchor tower at very high voltage and/or long spans. This tower type is typically used in groups of three, with each carrying one phase. There are two recommended options for mapping such a group. Either map all three towers and connect the power line to the middle tower. Or map only one tower and add the attribute triple_tower=yes to the tower.

No recommendations for splitting out the phases and noting Circuit = 1/3

Why?
The 3 towers are one functional unit and the 3 phase never diverge from each other.
Understand what you are mapping, and why it is not represented this way within the industry.

Here you have reverted two 500kV 3Phase generator transformers & one 220kV 3 phase generator transformers at Unit 5.

You reverted six 500/220kV single phase transformers at the 220kV yard.

At Unit 3/4 you reverted three 500/220/x kV single phase, 3 winding transformers.

Also, two 220kv 3 phase generator transformers.

All of which, can be located in this product catalog or any LPT - Large Power Transformer OEM catalog.

http://www.ztr.ua/files/ztr_d77-ztr_product_catalogue_2014.pdf

Validate why you reverted this additions and returned to 6 non defined transformers?

Additions (deleted)
- 750, 500, 220, 110 & 35kV [switch]yards
- Six 750/500kV 1-Phase XFRs
- Six 500/2200kV 1-Phase XFRs
- Four 750kV Reactive Compensation Units
- Two 220/110kV 3-Phase XFRs
- Two 110/35kV 3-Phase XFRs

Reverted back to
- Six "Transformers", no details

Here is a catalog from ZTR where you can locate all transformers I added this this site.

http://www.ztr.ua/files/ztr_d77-ztr_product_catalogue_2014.pdf