Hi, all footprints you mapped here represent buildings, thanks for moving the one to also align with imagery.

Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/176155492

The vast majority of buildings here represent buildings visible in the imagery, there was a small missalignment to Bing of some buildings which I corrected.

Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/176135809

Hi, it looks like you dragged a node of a highway creating overlapps. If you make an accidental action press the undo button or use `ctrl+z`. I undid the change here.

Please keep this feedback in mind when contributing in future. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/

Hi, some of the deletions you made here seem appropriate, because some of the existing building footprints did not accurately represent buildings, however you also deleted a marketplace POI in the process. Worry not; I restored it. just take care when deleting in future, using filters and double checking what you've deleted before uploading can help you prevent and spot invalid deletions.

Please keep this feedback in mind when contributing in future. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/

Hi, so of the footprints you added here represent buildings, but around half do not. cross reference Mapbox in this area using check the shortcuts `?` to se how to toggle imagery in ID. See how I mapeed some of these in https://osmcha.org/changesets/176072636

Please keep this feedback in mind when contributing in future. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/176038341

After tracing and tagging features which are likely square or round, please remember to square their corners `q`, or circularise them `o`, because it is almost impossible and time consuming to draw shapes so percisely manually. Buildings with metal or pitched roofs tend to have square corners; round buildings are identifiable by the distinctive cresent shaped shadow they cast. Unless the building is clearly a different shape then it's best to assume that it should be rounded or its corners should be squared. In the ID Editor, you can `right click` for access to editing functions. Since roofs tend to overhang walls trace the initial shape slightly smaller to allow a buffer for any change in size which may occur. In JOSM use the [buildingstools plugin](osm.wiki/JOSM/Plugins/BuildingsTools). In ID you must draw the shape accurately enough if you want every corner to be squared. This [video about squaring features in ID](https://youtu.be/Xs5wX592E1o) has more information and a demo.

The footprint in the NW represnets a building the SE one envelopes two. Each footprint should represent a building. Please watch [this video about imagery interpretation](https://www.youtube.com/watch?v=CJ-vUwtS3A8). Sometimes buildings may appear to share a common wall, but this is sometimes an illusion; only map them with shared nodes if you have reason to believe that they really do touch.

Please keep this feedback in mind when contributing in future. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/

Hi the footprint you added here represents a building, but it should be squared.
---

Published using OSMCha: https://osmcha.org/changesets/175987683

Hi, the footprints you added here generally represent buildings accurately.

When mapping L shaped buildings are you using the extrude tool `x`?

Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/

This looks to me like maybe walls, perhaps of a building which previously had a roof. What's the alternate source you're referencing in this changeset?
---

Published using OSMCha: https://osmcha.org/changesets/175952802

Hi, the footpritns you added here generally represent buildings and do so quite accurately, if they were smaller than the roofs that'd be fantastic.

Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175970648

Thank you for your contribution!

The footprints you mapped here envelope multiple buildings and are therefore invalid. It looks like you loosely traced plots and yards. I reverted this changeset.

Each footprint should represent a building. Please watch [this video about imagery interpretation](https://www.youtube.com/watch?v=CJ-vUwtS3A8). Sometimes buildings may appear to share a common wall, but this is sometimes an illusion; only map them with shared nodes if you have reason to believe that they really do touch.

When mapping buildings, please trace the shape accurately. Accurate building footpritns aid population estimates and prevent issues like data overlaps. Zoom out to obtain the orientation and shape, then zoom in so that you can accurately draw the footprint. Exclude shadows and yards when tracing the footprint. Keep in mind that you are looking at the [roofs of buildings](roof:shape=*#Roof_shape), but mapping their footprints. Depending on how the scene is lit, pitched roofs may have light and dark sections that belong to one building. Generally pitched roofs overhang the walls of a building, so a footprint slightly smaller than the roof is accurate. You can scale selected features in ID with `shift+(-/+)`, or JOSM with `ctrl.+alt+Lclick & drag`. Take care to make contributions that others can build upon.

Keep on mapping!

Please keep this feedback in mind when contributing in future. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/

If the features you mapped here are in fact buildings they likely have more regular/ less complex shapes. Please keep this feedback in mind when contributing in future. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175846979

Good to see you cross referencing another source but these buildings are no longer visible in Bing, so most likely no longer exist. Use alternate sources to aid your interpretation, but unless you know a source to be more recent, then don't add buildings only visible in it. Please keep this feedback in mind when contributing in future. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175821809

Thank you for your contribution!

Please do not connect the corners of buildings to other buildings or features such as highways or residential areas. In the iD Editor, hold down the `Alt` key to prevent your cursor from snapping to existing data and accidentally creating shared(grey) nodes. This [video about connected nodes](https://youtu.be/ltn1VOiq5_0) has more information and a guide.

Keep on mapping!

Thank you for your contribution!

After tracing and tagging features which are likely square or round, please remember to square their corners `q`, or circularise them `o`, because it is almost impossible and time consuming to draw shapes so percisely manually. Buildings with metal or pitched roofs tend to have square corners; round buildings are identifiable by the distinctive cresent shaped shadow they cast. Unless the building is clearly a different shape then it's best to assume that it should be rounded or its corners should be squared. In the ID Editor, you can `right click` for access to editing functions. Since roofs tend to overhang walls trace the initial shape slightly smaller to allow a buffer for any change in size which may occur. In JOSM use the [buildingstools plugin](osm.wiki/JOSM/Plugins/BuildingsTools). In ID you must draw the shape accurately enough if you want every corner to be squared. This [video about squaring features in ID](https://youtu.be/Xs5wX592E1o) has more information and a demo.

Keep on mapping!

Hi, all footprints likely represent buildings and they are generally acurate. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175815758

Thank you for your contribution!

Each footprint should represent a building. Please watch [this video about imagery interpretation](https://www.youtube.com/watch?v=CJ-vUwtS3A8). Sometimes buildings may appear to share a common wall, but this is sometimes an illusion; only map them with shared nodes if you have reason to believe that they really do touch.

Keep on mapping!

Please keep this feedback in mind when contributing in future. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175849839

Hi, the footprints you added here generally represent buildings, but could be more accurate, becasue a fair proportion are oversized.

When mapping buildings, please trace the shape accurately. Accurate building footpritns aid population estimates and prevent issues like data overlaps. Zoom out to obtain the orientation and shape, then zoom in so that you can accurately draw the footprint. Exclude shadows and yards when tracing the footprint. Keep in mind that you are looking at the [roofs of buildings](roof:shape=*#Roof_shape), but mapping their footprints. Depending on how the scene is lit, pitched roofs may have light and dark sections that belong to one building. Generally pitched roofs overhang the walls of a building, so a footprint slightly smaller than the roof is accurate. You can scale selected features in ID with `shift+(-/+)`, or JOSM with `ctrl.+alt+Lclick & drag`. Take care to make contributions that others can build upon.

Hi, this footprint represents a building, but it is oversized.

When mapping buildings, please trace the shape accurately. Accurate building footpritns aid population estimates and prevent issues like data overlaps. Zoom out to obtain the orientation and shape, then zoom in so that you can accurately draw the footprint. Exclude shadows and yards when tracing the footprint. Keep in mind that you are looking at the [roofs of buildings](roof:shape=*#Roof_shape), but mapping their footprints. Depending on how the scene is lit, pitched roofs may have light and dark sections that belong to one building. Generally pitched roofs overhang the walls of a building, so a footprint slightly smaller than the roof is accurate. You can scale selected features in ID with `shift+(-/+)`, or JOSM with `ctrl.+alt+Lclick & drag`. Take care to make contributions that others can build upon.

Please keep this feedback in mind when contributing in future. Thank you for your contribution. If you want to experience the OSM community or to get timely feedback from other mappers; I recommend that you attend a mapathon. You can find events here https://osmcal.org/