OpenStreetMap logo OpenStreetMap

Changeset When Comment
89140316 over 5 years ago

Thanks for fixing the path route.

As far as access restrictions, they do look reasonable. I tend to just do the minimum when adding restrictions and would probably never restrict horses. But then again, I'm never in an area where there are horses :) Definitely noting that motorized vehicles are prohibited is always good. Plus I like the wheelchair=no. I do a lot of mapping of sidewalks and curb cuts to help people with limited mobility. See https://accessmap.io for the work that UW's Taskar Center is doing.
---

Published using OSMCha: https://osmcha.org/changesets/89140316

89140398 over 5 years ago

I connected the footway to the new street you added. Do you know if the owner of the property just north of the trail on the cul-de-sac will allow pedestrians to use their driveway?
---

Published using OSMCha: https://osmcha.org/changesets/89140398

89140316 over 5 years ago

From the imagery, it doesn't appear that the sidewalk goes through the playground. Can you align the sidewalk with the imagery? If you need help let me know.
---

Published using OSMCha: https://osmcha.org/changesets/89140316

88945708 over 5 years ago

Tip: square buildings by selecting the outline, then just type a "q"
---

Published using OSMCha: https://osmcha.org/changesets/88945708

88854975 over 5 years ago

TIP: It help to leave a short changeset comment when you upload your edit.

I'll send you more info on OSM in a message.
---

Published using OSMCha: https://osmcha.org/changesets/88854975

88790382 over 5 years ago

Thank you for your edit. I reviewed your work and it look good.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/88790382

88759014 over 5 years ago

Tip: If the church occupies the entire building, add the tags to the building instead of a node. Either way is acceptable, but adding the information to the building says that the church occupies the entire building.
---

Published using OSMCha: https://osmcha.org/changesets/88759014

88753022 over 5 years ago

The motel looks like it's placed in the road. I would recommend moving it to either the office or main motel building.
---

Published using OSMCha: https://osmcha.org/changesets/88753022

88752710 over 5 years ago

Thank you for your edit. I reviewed your work and it look good.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/88752710

88663239 over 5 years ago

Thank you for your edit. I reviewed your work and it look good.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/88663239

88663601 over 5 years ago

Thank you for your edit. I reviewed your work and it look good.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/88663601

88664692 over 5 years ago

Tip: Instead of deleting then adding the service road, just adjust the geometry. That save the history of the object.
---

Published using OSMCha: https://osmcha.org/changesets/88664692

88642047 over 5 years ago

TIP: Imagery offset can cause the features to appear in the wrong location. Imagery offset can be adjusted using the tools on the right hand side.
---

Published using OSMCha: https://osmcha.org/changesets/88642047

88519515 over 5 years ago

TIP: Imagery is often offset by a few feet. The offset can be corrected using the tools found on the right side of the editor.
---

Published using OSMCha: https://osmcha.org/changesets/88519515

88519515 over 5 years ago

TIP: Imagery is often offset by a few feet. The offset can be corrected using the tools found on the right side of the editor.
---

Published using OSMCha: https://osmcha.org/changesets/88519515

88518869 over 5 years ago

TIP: Instead of deleting and adding a feature, just redraw the existing one. That saves the history of the object.
---

Published using OSMCha: https://osmcha.org/changesets/88518869

88478345 over 5 years ago

TIP: lake boundaries should match the imagery. I adjusted the lake.
---

Published using OSMCha: https://osmcha.org/changesets/88478345

88476506 over 5 years ago

TIP: We don't have test edits. Your work goes live once you upload the edit.

TIP: Instead of landuse, use building=house. Landuse is usually larger tracks of land, like a housing development.
---

Published using OSMCha: https://osmcha.org/changesets/88476506

88469581 over 5 years ago

TIP: To show that the public isn't allowed through gates, tag the gate then add access=private or even access=no. Using barrier=locked_forest_service_gate may not tell routers not to use the road since the tag value is unique. Can you fix the gates?

TIP: When editing in wide geographical areas, save your edits for each area you are working in.
---

Published using OSMCha: https://osmcha.org/changesets/88469581

88420592 over 5 years ago

Ron - by making this a one way road, it is impossible for routers to assign trips to and from your property. I would suggest dropping the one way. The single lane should be kept to warn drivers that only one car can use the driveway at a time.

Also - We don't use personal names, for example Conlin Private Driveway. Just add the tag access=private is sufficient. If there is a gate, it would be good to add that as well.

Let me know if you have any question or need help making the changes.
---

Published using OSMCha: https://osmcha.org/changesets/88420592