Hello. Thanks for mapping.
Please map more accurate and follow the rooflines more accurate. Square each rectangular building.
Shift multistory buildings to their footprint.
Check this out please
On this task, the high-rise buildings are often incorrect mapped.
You can see both one or more side walls and the roof. The Imagery is taken under a certain angle, so you can see more .
Often all visible walls and roofs are mapped as 1 building.
The correct way is to map the roofline and move the whole object on their footprint.
See this video.
https://youtu.be/dsfUcslLtVc?si=bEHwRl1sxDI_GA0H
Best regards

Hello. Thanks for mapping
The aim is to map hedges which can act as reference points for navigation purposes.
So, only hedges alongside highways and within view of roads are subject to mapping.
Don't map areas with scrub as hedges.
A hedge should be clearly visible as a narrow row of green.
Leave a gap where a road crosses a hedge please.

Hello. Thanks for mapping.
Please do not draw a line (hedge) alongside the border of a task. (the hedge continues. Just map the visible part.
In settlements it is not that important to map hedges. On the countryside it is important to know where hedges are as a guide for orientation.

Hi. On The task manager, you can read what to be mapped. (symbols)
Often, there are several projects on the same spot. 1 for roads, 1 for buildings.
The project manager decides what to be mapped. You are not forbidden to map buildings, but for the sake of the progress we ought to follow the instructions.

About hedges, use common sense. In the open areas like here, you will not find walls.
Best regards and keep mapping

Hello. From an imagery, we hardly can identify the surface of a road. So common use is to leave that to local mappers with knowledge of the situation
Best regards

Hello.
When you map hedges, please add a gap
where it crosses a road. (GPS driven NAV systems cannot deal with that.
Best regards

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping.

B: Overlapping buildings.

E: Buildings not squared or rounded.
G: Included the shadow of the building.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/174227118

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
D: Connecting Nodes to other features.

E: Buildings not squared or rounded.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/174183598

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
D: Connecting Nodes to other features.

E: Buildings not squared or rounded.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/174183598

Hello. Thanks for mapping.
Please do not add a layer to a building to hide an error !
Best regards

Hello. Thanks for mapping.
Please do not cluster buildings.
Each building need to be mapped individually.
Best regards and keep mapping

Hello. Thanks for mapping.
Please square each rectangular building you map.
Best regards and keep mapping

Hello. Thanks for mapping.
Please map the round buildings as well the next time.
Best regards and keep mapping

And, don't oversize the buildings. Most of them have an overhanging roof, so the building itself is smaller. Stay within the rooflines please.
Best regards

Hello, Thanks for mapping.
A few remarks about your mappings
The buildings you mapped are rather accurate, however, not squared. Each building (rectangular) ought to be squared with the Q key while selected.
You did not map the round buildings. They are part of the job.
Keep that in mind for the next mapping session.
Best regards and keep mapping

Hi. Another issue
Please follow the instructions how to map buildings, settlements etc.
No need to map individual buildings.
Best regards

Hello. Thanks for mapping.
You mapped hedges as fences. Please tag them as barrier=hedge
Best regards

Hello. Thanks for mapping. A few issues.
Please read the instructions how to map buildings and settlements.
You mapped each building a "landuse=residential"
Default buildings ought to be tagged as building=yes.
But the instructions don't ask to map buildings. Just add tag osm.wiki/Tag:place=....
You could have adjusted the outer border of the residential area because it has been extended since 2018 when it was mapped
Best regards

Hello. Thanks for mapping.
Please do not add the tag area=yes to a hedge.
Best regards

Hello. Thanks for mapping.
Please do not add the tag area=yes to a hedge.
Best regards