Hello . Thanks for mapping on this project.
When you map a road near the edge of your task, please map it a bit over the edge of your task. Another mapper on the adjacent task see this and can contiune that road.
Otherwise it will not been seen.
A track wider than 3 mtr is not to be tagged as a path, but as an unclassified highway.
Best regards

Hi. Another issue.
You mapped very narrow <2 mtr wide, as a track. Path should be the best tagging here.
Best regards

Hello. Thanks for mapping
Here, a through going highway is best to tag highway=unclassified and surface= unpaved. Rather than tag it as a track.
Check the instructions, please.
Best regards

Best regards

Hello. Thanks for mapping.
Please tag a highway track width >3 mtr not as path. Here, a through going highway is best to tag highway=unclassified and surface= unpaved.
Best regards

Hello. Thanks for mapping on this project.
Please do not tag paths as narrow=path.
This is an invalid tag, thus need to be adjusted.
Use highway=path or unclassified here.
Best regards

Hello. Thanks for mapping.
A question. Why did you add a bridge on a road crossing ? No waterway visible
I removed the tag.

way/1445904046/history#map=19/3.894621/44.509894
Best regards

Hello. Thanks for mapping on these projects.
A remark. When you map a highway near the edge of the task you are mapping on, continue a bit over the edge. Then other mappers who map on the adjacent task will see them and can continue the highway. Now you stopped before the edge, so nobody will be attended on those highways.
Please solve also issues shown by the issue triangle before uploading your mapping.
Best regards

Hi Adrian. Yes. I changed the tags to unclassified. And, yes, when you come across residential highways in the middle of woods e.d. Please change them as well.
Best regards

Hello. Thanks for mapping.
Please be aware that the correct tagging of paths/highways = highway=path rather than narrow=path which is an unknown tagging.
Best regards

Hello. Thanks for mapping on this project.
Please map more accurate and square each building with the Q key while selected.
And, do not cluster buildings.
Best regards

Hello Adrian.
You removed tags from residential highways. Please take into consideration then the tag 'residential' is in place.
Here, many roads go through rural/wood areas. Advise to change the tag to unclassified.
Best regards

Hello. Thanks for mapping.
A remark.
Please do not map wood areas.
You are only allowed to map within your task square. Woods covers multiple tasks and ought to be mapped direct on OSM. Not in this project. It is not required as well.
Best regards

Hello. Thanks for mapping.
Please square the buildings you map with the Q key while still selected.
Default tagging for buildings is 'building=yes'
On the east side, all buildings still need to be mapped.
Best regards

Hi again.
Please do not add a layer to a building to avoid an error. Just adjust the situation.
Best regards

Hello. Thanks for mapping.
You removed tags from this road which were tagged since 2011 as a path.
way/124037429/history#map=18/31.796394/130.673314
Now, you can see clearly that it is a normal road, paved, and should be retagged to highway=unclassified.
Best regards

Hello. Thanks for mapping.
Please map more accurate and square the rectangular buildings.
Tagging should be building=yes. Nothing else.
Best regards and keep mapping

On this task, the high-rise buildings are incorrect mapped.
You can see both one or more side walls and the roof. The Imagery is taken under a certain angle, so you can see more .
Often all visible walls and roofs are mapped as 1 building.
The correct way is to map the roofline and move the whole object on their footprint.
See this video.
https://youtu.be/dsfUcslLtVc?si=bEHwRl1sxDI_GA0H

Best regards and keep mapping

We welcome you as a new mapper.
Thanks for your contribution to this project.
Your changesets are reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Issues found on your mappings
A: Inaccurate mapping.
B: Overlapping buildings.
C: Collecting adjacent buildings and mapped it as 1 building.
D: Connecting Nodes to other features.

E: Buildings not squared or rounded.

High building(s) incorrect mapped.
Check this footage how to map high buildings

https://youtu.be/dsfUcslLtVc?si=yH6eWDbsb_ILAVb9
Or See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping.
High building(s) incorrect mapped.
Check this footage how to map high buildings

https://youtu.be/dsfUcslLtVc?si=yH6eWDbsb_ILAVb9
Or See par 20 chapter About Buildings

Best regards and keep mapping

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/172160222

Hello. Thanks for mapping.
Please map more accurate and follow the rooflines. Square each rectangular building and move multistorey buildings to their footprint.
Check this out please

On this task, the high-rise buildings are often incorrect mapped.
You can see both one or more side walls and the roof. The Imagery is taken under a certain angle, so you can see more .
Often all visible walls and roofs are mapped as 1 building.
The correct way is to map the roofline and move the whole object on their footprint.
See this video.
https://youtu.be/dsfUcslLtVc?si=bEHwRl1sxDI_GA0H

Best regards