Hello. Thanks for mapping.
You identified and mapped most buildings,
However, do not cluster buildings.
Each building need to be mapped as an individual building. I adjusted them. You did not square the rectangular buildings with the Q key while still selected.
I invalidate this task.

Best regards and keep mapping

Hello. Thanks for mapping.
Please square each rectangular building with the Q key while it is still selected.
Best regards and keep mapping

Hello. Thanks for mapping.
I noticed that you map multistory buildings in correct.
Please check this footage how to map them
https://drive.google.com/file/d/13RTwH7sChRWrG5bIjysF2ripBgh3F5l4/view?usp=drive_link
Check here how high buildings ought to be mapped.

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Best regards

another point.
Map highways and waterway a bit over the edge of a task. Other mappers on adjacent task will see them and can continue mapping.
Best regards

Hello. Thanks for mapping.
Please get your knowledge of how to tag highways up to date.
Tagging a highway=yes is not correct.
Use highway=unclassified or track here.
The highway you mapped on the westside is hardly to see. Don't map those.
btw. This is a mapping project for farmland and waterways, Please focus on that.
Best regards

Hello. Thanks for mapping,
You mapped many streams. However, the flow direction is not always correct. The feed comes from the hills towards the dales. You tagged the flow direction often to the other way. Start mapping from the source, or reverse the flow when it is incorrect.
Best regards and keep mapping
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/169813556

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM. (sorry for the late respons)
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------

A: Inaccurate mapping
C: Collecting adjacent buildings and mapped it as 1 building.
D: Connecting Nodes to other features.
E: Buildings not squared or rounded.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166053791

Hello.
Here the same situation.
Clustered buildings, mapped a courtyard as a building or included it in a mapped building.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/169392109

Hello.
Here you mapped clustered buildings as well as included courtyard into a mapping.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/169392326

Hello.
Here you clustered buildings and mapped a whole plot including a courtyard as 1 building
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/169392407

Hello. here you connected nodes to another building.
Buildings not squared. included a courtyard in a building.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/169448671

Hello.
Here you mapped also a few plots with courtyard as a single building. Check the shadow to see where a building ends.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/169450877

Hello.
Most buildings are well mapped. Don't forget to square the buildings.
When you see a shadow north to a building, it is the end of the roofline.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/169451226

Hello,
My comments on these mappings.
Clustered buildings.
Mapped whole walled plot with 1 building on it as a building.
Check for shadows. the higher a building, how longer the shadow. Walls give mostly a small shadow, check the ground to decide if the traces are from a building or not. ( after a while you get experience to identify them)
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/169451512

Here you mapped several clusters of buildings. They should be mapped as individual ones,
1 plot with a few buildings and yard is mapped as a large building. In fact, there are 2 smaller buildings and the courtyard, the plot is enclosed by a wall
Check this picture. Red marked buildings are clustered.
Arrow marked plot are 2 (small) buildings and a courtyard. You mapped the whole plot as a building.
https://drive.google.com/file/d/1W5EiwRK3ol_IRVx_D2YCfYpz9HT9QGGG/view?usp=drive_link
I invalidate this task so that you can adjust your mappings.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/169451788

Hello.
We welcome you as a new mapper.
I respond to your request, how to improve your mapping skills. I review your work and comment on that and include samples where and how to improve.
This is about task 913 where several issues have been found
I will review other changesets as well and react on those.

Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------

C: Collecting adjacent buildings and mapped it as 1 building. You regularly did !
D: Connecting Nodes to other features.
E: Buildings not squared or rounded.
H: Included a yard of clearing.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

It is important to have attended the lessons.
Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/169449328

Hello. Thanks for mapping.
Please do not map clustered buildings.
Each building should be mapped as an individual building.
Best regards and keep mapping

Hello. Thanks for mapping.
You know that you did not tag 17 buildings out of 163 buildings you mapped ?
Don't you use the building plugin ?
When you use this, it automaticly square the building you map and tag it. You can also map fine round buildings with it.
Here is the link,
osm.wiki/JOSM/Plugins/BuildingsTools
Best regards and keep mapping

Hello. Thanks for mapping here.
A remark.
Please do not connect buildings together with their nodes.
Don't cluster buildings as well.
Best regards

Hello. Thanks for mapping on this project.
As you are a new mapper, we (validators) takes the time to review your work and comment on your mappings when there is a reason for that.
When there is already a place tag, don't add another one, please.