Hello. Thanks for mapping.
You mapped here,
way/1423983724/history#map=19/31.743243/130.695452
7 buildings, despite it is 1 building with 2 roof parts, and a round storage tanks
The lowest objects are car parks.
you also included the front wall into your mapping. Just map over the rooflines and move the whole to the footprint.
This link shows large buildings, but the idea is the same

Check this page to see what I changed.
https://overpass-api.de/achavi/?changeset=170815240
Best regards

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------

C: Collecting adjacent buildings and mapped it as 1 building.

D: Connecting Nodes to other features.

E: Buildings not squared or rounded.

F: Buildings partly hidden under trees.

G: Included the shadow of the building.

H: Included a yard of clearing.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/170392562

Hello. Thanks for mapping on this project.
We welcome you as a new mapper.
We cannot expect that a new mapper maps everything in according to the requirements.
Here I show you where your mappings are not in line with the mapping standards.
1 Each rectangular building need to be squared with the Q key while selected.
2. Map no clustered buildings. Each building need to be mapped as an individual building.
3. Don't connect nodes of buildings to other objects (including buildings)
4, Where buildings show both a sidewall and the roof, map the roofline accurate and move the whole to its footprint on the ground, Don't include both roofline and walls (and shadow) in a mapping
Best regards and keep mapping.

Hello. Thanks for mapping.
Please do not cluster buildings.
Each building need to be mapped individual.
Best regards and keep mapping

Hello. Thanks for mapping.
A remark. Please do not include the shadow of a building into your mapping.
Best regards

Check this page for the corrections I made.

https://overpass-api.de/achavi/?changeset=170618627

Best regards

Hello. Thanks for mapping.
Please be more accurate in mappings. You regularly map just a rectangular (sometimes included the shadow as well) Buildings are often more complex.
Best regards and keep mapping

Hello. Thanks for mapping.
You often include the shadow next to a building in your mapping.
These are no part of a building.
Keep that in mind at next mappings.
Best regards and keep mapping

Hello. I reviewed your work here as well.
Also, many duplicated buildings.
Check the bottom line of IDeditor for a message in blue telling how much hidden features there are.
Zoom in further to see the buildings
Best regards

Hello. Thanks for mapping.
I am afraid that you have a bad start.
Sorry to say, but your mappings are not as what we might expect.
Issues : building nodes connected to each other.
Buildings not squared.
Many buildings are duplicated (mapped a month before by another mapper)
I think that you did not zoom in far enough to see already mapped buildings. Check the bottom line in IDeditor for hidden mappings.
I invalidate this task.
Best regards

Thanks for mapping.
I am sorry to say, but these mappings need to be improved.
Clustered buildings need to be split into individual buildings.
Buildings which does not meet their footprint need to be adjusted.
Best regards and keep mapping

Hello. Thanks for mapping.
Please be sure to direct the flow to the river on the east.
Ad intermittent as well to the rivers.
Best regards

Hello again. Forget my comment about the roof/front mapping.
My Offset was incorrect.
Best regards

Hello. Thanks for mapping.
You did a great job on this task, however, you often mapped both the front side and the roof as a building.
You know how to map multi story buildings, I have seen, but this method is also to be used at buildings where you see both a sidewall and the roof.

Check here how high buildings ought to be mapped.

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Or check this footage:
https://drive.google.com/file/d/13RTwH7sChRWrG5bIjysF2ripBgh3F5l4/view?usp=drive_links
Best regards and keep mapping

Hello. Thanks for mapping.
A few remarks.
Please do not collect multiple buildings and tag it as 1 building.
Square each rectangular building with the Q key.
Solve the issues shown by the issue triangle before you upload your work.
Best regards and keep mapping

Hello. Thanks for mapping.
Please solve the issues shown by the issue triangle before you upload your work.
3 waterway crossings had to be identified and mapped !
Best regards and keep mapping

Hello. Thanks for mapping.
Please square each rectangular building with the Q key while it is still selected.
Don't ignore the warnings on the issue triangle, and solve them before uploading your mappings.
Best regards and keep mapping

Hello. Thanks for mapping.
Please do not map wood areas.
Not part of the project.
Your view is limited to your task square, but the wood area covers a much bigger area. Not to be mapped in Ideditor,
Now you mapped woodland areas within a bigger already mapped woodland area.
Best regards and keep mapping

Hello. Thanks for mapping.
A few remarks.
Please do not collect multiple buildings and tag it as 1 building.
Square each rectangular building with the Q key.
Solve the issues shown by the issue triangle before you upload your work.
Best regards and keep mapping

sorry, validated after solving issues.
Best regards