Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator.
We welcome you as a new mapper.
I am sorry to say but your mapping needs some improvements.
Please pay attention to next summarized issues. ( see attached document for more info)

Explanation can be found on this document what might be helpful to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping !
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/138715917

Hello. Thanks for mapping.
Please tag a highway after drawing it.
I tagged it as highway=unclassified.
Please read this document
About tagging of highways
Please read and follow the tagging rules on this linked document.
Decision tree, which tag to be used for roads
https://drive.google.com/file/d/1S48CEVi3yiAYWhIJu57jtLyv0ZVUbGwJ/view?usp=share_link
osm.wiki/East_Africa_Tagging_Guidelines
or
osm.wiki/Highway_Tag_Africa

Hello. We welcome you as a new mapper.
Please read the instructions what to be mapped. This is a building project.
Please focus on that. Landuse areas are not to be mapped through the tasking manager. It limits your mappings to the particular task.

There are many buildings that still need to be mapped in this task.

Please only mark the task as complete when it is fully mapped according to the project requirements in the task instructions. If you want to move on and try a different task, just say "no" to the "Is this task completely mapped?" question or use the "select another task" button.
Best regards and keep mapping.

Hello. Thanks for mapping .
We welcome you as a new mapper.
Please don't add hashtag as a description to an object you mapped.
These hashtags are only to be used on the description on TM which you did as well.
Don't forget to square a building with the Q key when it is still selected.
You overlooked several buildings.
Best regards and keep mapping

Hello. Thanks for mapping.
Buildings partially hidden under trees are not drawn correctly. Extrapolate the rooflines.
Best regards and keep mapping

Hello. Thanks for mapping.
Not all buildings have been mapped.
Why do you tag buildings as buildingpart=yes. By accident ?
default is building=yes.
I corrected them
Best regards

Hello. Thanks for mapping here.
Just a question. You mapped quite a lot of buildings here. Not all of them. Why not? Now, another mapper needs to complete this task.
Another point.
You should have seen that the offset is not correct. Please correct the offset so that the highways match their trace on the ground.
Best regards
Frans S
Global Validator.

Hello. Thanks for mapping.
You use the wrong tagging when you map highways. You only tagged the surface with tag footpath or some other tag.
About tagging of highways
Please read and follow the tagging rules on this linked document.
Decision tree, which tag to be used for roads
https://drive.google.com/file/d/1S48CEVi3yiAYWhIJu57jtLyv0ZVUbGwJ/view?usp=share_link
osm.wiki/East_Africa_Tagging_Guidelines
or
osm.wiki/Highway_Tag_Africa

--------------------------------------
Tag highway=Path rather than footway/ Paths are usually impassable for motorized vehicles. (However, African motorcyclists can sometimes do the most improbable stunts.) Never use path to mark an unpaved or unsealed road in built-up residential areas: Such roads should be tagged according to the local conventions (usually highway=residential if passable by vehicles and pedestrians, or highway=footway for pedestrian only where they can sometimes be separated from another parallel highway for vehicles).
----------------------------
How to measure the width of a road in IDeditor:
Zoom in as far as possible and draw a line between the shoulders of a trace and click
ctr +shift+M to shows measurements
click on the line between the nodes, and you get the width.
Best regards

Hello. Thanks for mapping.
Please try to find traces on the ground which indicate that it is a path/road.
What you mapped here are to my opinion mostly bushes rows separating farmland
Don't go far into details on farmland, which is only of local interest.
Focus on through going traces.
Best regards and keep mapping.

Hello. Thanks for mapping.
You mapped a number of traces without tagging them. I tagged them as paths.
When you map highways, be sure that you connect them to other highways . So you are making a network. Isolated pieces of highways are not helpful and cannot be reached by NAV systems.
Best regards

Hello. Thanks for mapping.
You forgot to tag the traces you mapped. I tagged them as path.
Best regards

Thanks for your contribution to this project. We welcome you as a new mapper.
This changeset (and others on this project) is reviewed by a Global Validator.
I am sorry to say, but your mappings do not meet the quality standards of HOTOSM.
Please pay attention to next summarized issues. ( see attached document for more info)
A: Not accurately drawn.
C: Collecting multiple buildings and mapping them as 1 building.
E. Buildings not squared.
G: include the shadow of a building in the mapping.

Explanation can be found on this document what might be helpful to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping !
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/138103662

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator.
I am sorry to say, but your mappings do not meet the quality standards of HOTOSM.
Please pay attention to next summarized issues. ( see attached document for more info)
A: Not accurately drawn.
E. Buildings not squared.
These comments are valid for all your changesets on this project !

Explanation can be found on this document what might be helpful to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping !
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/138524991

Hello. Thanks for mapping here
A Building partially hidden under trees is not drawn correctly. Please Extrapolate the rooflines.
Best regards

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator.
* I am sorry to say, but your mappings are rather sloppy and hardly squared. Please pay more attention by following the outlines of a building (with extensions).
Please pay attention to next summarized issues. ( see attached document for more info)
A: Not accurately drawn.
B: Overlapping buildings.
C: Collecting multiple buildings and mapping them as 1 building.
D: Connecting nodes of buildings to other buildings or features like roads and residential areas.
E. Buildings not squared.

Explanation can be found on this document what might be helpful to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping !
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/138087427

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator.
I am sorry to say, but your mappings do not meet the quality standards of HOTOSM.
Please pay attention to next summarized issues. ( see attached document for more info)
A: Not accurately drawn.
C: Collecting multiple buildings and mapping them as 1 building.
E. Buildings not squared.
H: Incorporated the yard or a clearing into the mapping.
This is a building mapping only project.

Explanation can be found on this document what might be helpful to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping !
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/138526362

Hello. Thanks for mapping.
You duplicated already mapped buildings.
Did you zoom in far enough to see them?
On the lower line of ID editor you should see a note if there mapped buildings not visible. You need to zoom in further till they are visible.
I removed the duplications.
Best regards

Hello. Please don't map highways on this project.
See also my comments on your other changesets.
The use of service roads here is not correct.
See the wiki highways Africa.
---

Published using OSMCha: https://osmcha.org/changesets/138494652

Hello.
About mapping of land use features.
Please don't map them on projects on the Tasking manager.
Most land use objects covers more than a single task. You are limited to the task you have selected. Therefor, it makes no sense to map these features.
They should be mapped by local mappers with local knowledge.
Btw. You mapped so many small traces and tagged them as service road. I removed most of them. Just focus on the objects which has to be mapped.
Best regard and keep mapping
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/138497844

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator.
I am sorry to say, but your mappings do not meet the requirements of this project.
This is a building project. Please don't waste time on mapping each vague trace of paths and landuse tagging.
When you want to highways in general, follow these guildlines
* Tagging of buildings. For HOTOSM projects, the standard tagging is 'building=yes' No text adding. Please keep that in mind at further mappings.

Please pay attention to next summarized issues. ( see attached document for more info)
E. Buildings not squared.
* Tagging of buildings. For HOTOSM projects, the standard tagging is 'building=yes' No text adding. Please keep that in mind at further mappings.

Explanation can be found on this document what might be helpful to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping !
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/138497844