I am sorry, I do not find anything in the wiki regarding Tagging for the renderer or Tagging for the router that is related to where we put nodes on a building. The rule is to put things as close as possible to where they are, so you should put the POI node as near as possible to its entrance. Putting the node in the centroid of the building is the default when you don't know where the entrance is, but when you do know, you should put it next to the entrance (more precise, more accurate)

We do not lie to the router, we just put the node near the entrance, which is physically what should be done. Putting the node in the centroid of the building/area has no meaning whatsoever. There are so many simulations errors caused by having nodes snapping at the back alley instead of the front door/front service road.

Thanks for adding this information!

Please keep the POIs near their main entrance, for better routing. Thanks!

Cycleway=link va avec highway=cycleway, donc ça ne règle pas le problème soulevé ici d’utiliser highway=cycleway pour un segment qui ne fait pas partie d’une piste cyclable.

SVP ne retirez pas ces types de lien sans une discussion avec la communauté. Nous avons des outils qui détectent les brisures dans le routing/calcul de chemin. Si vous enlevez ces liens, il faudra remettre ces petits connecteurs car l'outil va mettre des erreurs partout. À la place, vous pouvez proposer un autre tag, mais il faut que la communauté l'accepte.

Oui, on utilise le highway=cycleway pour des connections, car il n'y a pas encore de tag pour des "connectors" entre les rues et les entrées de parc par exemple. SVP ne pas retirer ces connections, car ça va briser les calculs de chemin pour toute la région. À cet endroit, il faut un lien cyclable entre la rue et le trottoir sinon ça ne passe pas dans les calculateurs de chemin et ça doit passer, car c'est légal de marcher sur le trottoir avec le vélo. Il y a des milliers de petits liens comme ça dans la région qui ont été ajoutés pour cette raison. Quand il y aura un lien de type connector, on pourra les mettre à jour facilement, mais ce n'est pas le cas maintenant.

J'ai modifié la configuration et ajouté une note plus claire. Comme ça on force les cyclistes à prendre le trottoir avec bicycle=dismount sur 1-2 mètres le temps de rejoindre Crémazie ou de continuer sur Molson vers le nord.

On parle bien de l'intersection Molson/Crémazie? Il est légal en tout cas de débarquer du vélo et de prendre le trottoir sur quelques mètres. Selon l'emplacement des barrières de béton, il est aussi possible de passer sans débarquer du vélo à la droite ou à la gauche dans le petit espace avec un vélo peu large. Ça nous prendrait une photo récente pour vérifier. Le lien que j'ai ajouté est un connecteur de type crossing (un jour on aura un vrai type de highway qui fait une connection).

Ok, parfait, merci!

Les arrêts à cet endroit on bien été retirés par la ville?

bicycle=discouraged is only for places with a specific sign discouraging cyclists to use the street. It is not for where we or anyone think it is dangerous or hasardous to cycle there. I wish there was a way to determine the degree of dangerousness of a road, but it does not exist yet. For such a tag, please discuss in the OSM community forums or on the wiki proposed pages.

After checking, it seems it could be true for Tesla to use OSM data. I checked the configuration of Boulevard Taschereau there and the right lane is so large that it was counted as two lanes, but there is indeed no markings so I converted to 4 lanes instead of 5 for this segment. I also changed the double exit lane to a single one. There used to be a bus lane there but it seems it is now inactive. See https://ibb.co/9VZr178 where we moved the exit lane up to the theoritical painted gore.

Ok but tesla is using google maps as navigation map data since at least 3-4 years.

I will verify the number of lanes there as soon as possible.

In Quebec, we use the theorical gore (including paint) instead of the physical one for merging transition lanes. Thanks!

Please do not change motorways and trunk roads around Montreal, they have been adjusted with precise sources and should only be updated after road works. Thanks!

Please read the official wiki before doing edits on the openstreetmap data. Also, please keep the street names on the crossings as it is the way we do it in Quebec/Montreal. Thanks!

Hi! Thanks for your contributions!
However, the cycleway tags were already set on the road itself since there is no separation between the road and the cycleway here (flex posts are usually not considered a valid separation). Please enhance the cycleway tags on the road way instead. You can refer to the official wiki to know how to do this, Thanks and have a nice day!

Hi! Thanks for your contributions. However, your edits are non standard. Please do not add service roads as parking spaces. Also, since the cycleway is not separated from the road here, you should not create a separated way for the cycleway. The tags were already set on the road itself. I will revert this changeset. Please take the time to read the wiki before doing more edits. Thanks and have a good day!

changeset/158491446 connected the access service road to the main road as you asked. However I still think it is far fetched and the angle is too large. I still would like to know more how this intersection was flagged in your software. Thanks!