Hi Tordanik,
danke für die Antwort. Ich habe es nun auf man_made=water_tap gesetzt und das drinkable entfernt. So wird es per StreetComplete nochmal abgefragt und die Wahrscheinlichkeit steigt, dass sich es jemand vor Ort nochmal genauer anschaut.
Grüsse,
redd

Hi MalingaGIS,
thanks for your response. Since you now have found your profession. You may can change the values for the roof:shapes to the common values of skillion/gabled/hipped and change the building:age to start_date (calculation needed).
Since OpenStreetMap is a community project, I thinks it's important that everybody who contributes to it, feels responsibity for their contributions.
I dont' like mass edits and mass changes which are a pit to the community.
Thanks,
redd

wurde angepasst, danke!

danke!

Hi Tordanik,
danke für deine vielen Beiträge zu OpenStreetMap über so viele Jahre!
Das damals genutzte amenity=water bei node/907035671/history ist leider etwas unklar.
Falls es sich um einen Wasserhahn auf dem Friedhof handelt für Bewässerung, dann könnte man_made=water_tap verwendet werden.
Dabei könnte auch das drinkable=no durch drinking_water=no ersetzt werden.
Vielen Dank und schöne Grüsse,
redd

Hi Paradine,
danke für deine vielen Beiträge zu OpenStreetMap über so viele Jahre!
Das damals genutzte amenity=water bei node/4405339095/history ist leider etwas unklar.
Falls es sich um einen Wasserhahn auf dem Friedhof handelt für Bewässerung, dann könnte man_made=water_tap verwendet werden.
Danke,
redd

Hi Rosty,
danke für deine vielen Beiträge zu OpenStreetMap!
Das von dir genutzte amenity=water bei node/3892219245 ist leider etwas unklar.
Falls es sich um einen Wasserhahn auf dem Friedhof handelt für Bewässerung, dann kann man_made=water_tap verwendet werden.
Danke,
redd

just saw that the tags are from much older changeset, sorry that I adressed it to you!
changeset/20518387

Hi there,
you used some uncommon tags like roof= and use= here.
For roof material you could use roof:material= and for the use of a building there is osm.wiki/Tag:building:use=.
Can you please have a look and improve you tagging?
Thanks,
redd

and you added the tags building:age, which are problematic, since the still age. Now the buildings are 6 years older then when you mapped it. What was your source for it?

Hi MalingaGIS,
you used the value roof:shape=2 faces (pitched) which is not documented and therefore unclear. Meanwhile we have established tags. Are all these just gabled roofs?
Thanks,
redd

thanks!

ist evtl. half-hipped gemeint?

Hi wegavision,
was meinst du mit roof:shape=half_round? Das ist nicht dokumentiert, und daher unklar.

Laut Luftbild sah das vorherige hipped Walmdach für mich ok aus way/88362595

Kannst du das nochmal ansehen?

Hier dieüblichen Werte von osm.wiki/DE:Key:roof:shape.

redd

I can't recognize it from aerial imagery by myself.
And tagging for a curved roof may be roof:shape=round, otherwise have a look at common roof shapes: roof:shape=*

Hi samlian,
thanks for you contributions. I hope you are still available. Can you clarify what you meant with roof:shape=roundledled?
May you fix it to just rounded? It's on these 5 industrial buildings here: way/543319019
Thanks, redd

Hi Ijon_Tichy,
thanks for you contributions to OpenStreetMap for so many years.
I may found an error here with roof:shape=rou, but couldn't confirm from aerial image, that its really round, because resolution is to bad.
May you check this again, what you really meant here?
way/392102421
Thanks,
redd

Hi lorenzoguidotti,
thanks for you contributions over so many years to OpenStreetMap.
I found a small error from this changeset, may you please have a look at the roof shape of building way/259201025 and that next to it?
Thanks,
redd

Hi mitubato,
thanks for your contributions to Openstreetmap!
Can you have a look at way/778552139 again, please?
There you mixed the area=yes into the roof shape.
Thanks,
redd

Hi Chidubem,
thanks for your contributions. Round buildings usually have a dome roof instead a round roof (barrel roof).
Unfortunately I cannot see any buildings here anymore on aerial imagery.
May you check this please again with the roof shapes described here: roof:shape=*

regards way/693914057

Thanks,
redd