Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

Please avoid mapping several buildings as one building. Every building must be traced separately. Zoom in as close as possible to see the outline of the buildings, hit each corner of the building carefully. Look for shadows, open ground, changes in roof color and vegetation to differentiate buildings.

Also pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/141055748

I did a partial revert (only the buildings), see changeset/140942824 and further

Hi, thanks for mapping.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please be more careful with tracing the outlines of the buildings. Zoom in as close as possible to see the outline of the buildings, hit each corner of the building carefully.

Check out this article with basic information on how to map buildings: https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140682370

Hi, thanks for mapping.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140697960

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140702899

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140703186

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please be more careful with tracing the outlines of the buildings. Zoom in as close as possible to see the outline of the buildings, hit each corner of the building carefully.

Check out this article with basic information on how to map buildings: https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Especially check section F, Mapping of buildings partly hidden by trees.

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140707562

Check out these articles with basic information on how to map buildings:
https://learnosm.org/en/hot-tips/tracing-rectangular-buildings/
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

You deleted a few buildings here that possibly contain valuable information that should be preserved. Be vary careful when deleting, it is better to fix or leave it when you are not sure. For this reason i decided to reverse this changeset/140708216.

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140708216

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Also please be more careful with tracing the outlines of the buildings. Zoom in as close as possible to see the outline of the buildings, hit each corner of the building carefully. Look for shadows, open ground, changes in roof color and vegetation to differentiate buildings. Your editors' Background settings provides the opportunity to change the Brightness, Contrast etc of the imagery. This can help to see buildings etc. more clearly.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140708216

Please be more careful with tracing the outlines of the buildings. Zoom in as close as possible to see the outline of the buildings, hit each corner of the building carefully. Look for shadows, open ground, changes in roof color and vegetation to differentiate buildings. Your editors' Background settings provides the opportunity to change the Brightness, Contrast etc of the imagery. This can help to see buildings etc. more clearly.

Check out these articles with basic information on how to map buildings:
- https://learnosm.org/en/hot-tips/tracing-rectangular-buildings/
- https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140393550

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140393550

Hi, thanks for mapping. You requested a review of your mappings.

Your buildings are well mapped. Good location, square corners and precise outline.

Thanks and regards, Martien, HOT validator.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140397895

Please be more careful with tracing the outlines of the buildings. Zoom in as close as possible to see the outline of the buildings, hit each corner of the building carefully. Look for shadows, open ground, changes in roof color and vegetation to differentiate buildings. Your editors' Background settings provides the opportunity to change the Brightness, Contrast etc of the imagery. This can help to see buildings etc. more clearly.

Check out these articles with basic information on how to map buildings:
- https://learnosm.org/en/hot-tips/tracing-rectangular-buildings/
- https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140411680

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140411680

Hi, thanks for mapping. You requested a review of your mappings.

Your buildings are well mapped. Good location, square corners and precise outline.

You can improve by avoiding mapping several buildings as one building. Every building must be traced separately.

Thanks and regards, Martien, HOT validator.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140413425

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done.

As to the highways: the long residential road running west to east is connecting several settlement and should be better retagged as unclassified. The shorter side roads you mapped and tagged as track. But since these give access to houses they would be better tagged as residential.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140259374

Please wait with uploading till you mapped several features (eg buildings). That way you work faster. It also makes it easier for validators to judge the quality of your mappings. Thanks.
---

Published using OSMCha: https://osmcha.org/changesets/140261041

Please be more careful with tracing the outlines of the buildings. Zoom in as close as possible to see the outline of the buildings, hit each corner of the building carefully. Look for shadows, open ground, changes in roof color and vegetation to differentiate buildings. Your editors' Background settings provides the opportunity to change the Brightness, Contrast etc of the imagery. This can help to see buildings etc. more clearly.

Check out these articles with basic information on how to map buildings:
- https://learnosm.org/en/hot-tips/tracing-rectangular-buildings/
- https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140257880

Hi, thanks for mapping and welcome to HOT. You requested a review of your mappings.

The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon.

Please watch these 2 short video for more info:
-Buildings--> https://www.youtube.com/watch?v=Xs5wX592E1o
-Roads--> https://www.youtube.com/watch?v=ZBLwb2nisJQ
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140257880

Please be more careful with tracing the outlines of the buildings. Zoom in as close as possible to see the outline of the buildings, hit each corner of the building carefully. Look for shadows, open ground, changes in roof color and vegetation to differentiate buildings. Your editors' Background settings provides the opportunity to change the Brightness, Contrast etc of the imagery. This can help to see buildings etc. more clearly.

Check out these articles with basic information on how to map buildings:
- https://learnosm.org/en/hot-tips/tracing-rectangular-buildings/
- https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Thanks so much for your contribution, Martien, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/140326675