Hallo Attila194,
die Hausnummer 25f die du hier eingetragen hast ist bereits in unserer Datenbank vorhanden. Ebenso ist tourism=attraction bei einer Hausnummer falsch.
Somit habe ich die Hausnummer wieder entfernt.
Ich weiß dass du bereits darauf hingewiesen wurdest, die richtigen keys zu verwenden.
Bitte halte dich an die Vorgaben unserer Wiki: osm.wiki/DE:Adressen
Du kannst dich auch direkt auf unserer Seite(www.osm.org) anmelden und hier die Daten ändern, denn maps.me ist in seinen Funktionen beschränkt.
So kannst du beispielsweise Satellitenbilder verwenden die dir das erfassen/bearbeiten erleichtern.
lg

Hi poornibadrinath,
you deleted here a lot of data.
Next time check data bevore deleting, because no all nodes/ways what added/changed Attila194 are wrong.
User cxs had a lot of work to recreat all addresses you deleted here.
way/453382826
Also I have to recreate a fuel station deleted from you in this changeset:
way/173529807
In Europe are a lot of active mapper, so next time please open a error report and wait with deleting.

Bitte sieh dir die Windräder noch ein mal an.
note/629457

If this is private, you can use access=private and if this was the SP205 there is nothing wrong if I add old_ref to the track and the private part in the south.
The bridge should be mapped with access=private, old_ref=SP205 and on the north end of the bridge noexit=yes, because this bridge existing for real.

why have you deleted the bridge what I added here? way/459208064
I can see this perfect on the Bing image and all other what we can use for OSM.
Also the way from north to south for me looks like the old part of the SP205, and so I added old_ref=SP205.
Ant at last, the enter in a roundabout should not connected with the same node as a exit.
Also you have edited(very little) the track what I have added in the north of the roundabout.
Why you changed all these after I made this?
And if you revert a changeset from a other user, you have to write a better changeset comment.

Please give me some answer here!

All these links are from ANAS or using data from ANAS.
OSM use numbers what are on the streetsings and not the numbers what using some site they not can be used as source.
osm.wiki/Good_practice#Map_what.27s_on_the_ground
corps.it link is from 2015 and use part of data from ANAS link in your first post.
motorionline.com quote:"Fonti Dati: ANAS e altre fonti istituzionali".
mobilita.org use data(2015) from first ANAS link you posted above.
siracusatimes.it use the same data(2015) from ANAS.
latest link from you is from ANAS from 2015.
Because all you links are from ANAS and from 2015 and the image from Mapillary is from middle 2016, I changed the ref to that from Mapillary: "ref=aut.CT-SC" and "unsigned_ref=A01".

for me this looks like a not official number from ANAS.
The immage from mapillary is from August 2016 and the pdf from your link is from 2015(only this pdf use A01 for this motorway).
Also is to check, if you have the license to import data from ANAS website to OSM!

Hi fayor,
why have you changed the "ref=A CT-SR" from Autostrada Catania-Siracusa to "ref=A01"?
There is no "A01" in Italy.
what are you using at source for this change?
Correct ref described in Wikipedia should be "ref=aut.CT-SR", and Mapillary image show also "ref=aut.CT-SR":
https://d1cuyjsrcm0gby.cloudfront.net/Ztqwst1l1NEgoPdq43v5_A/thumb-2048.jpg

Sry dass ich nicht geantwortet habe.
Hatte Probleme mit meiner Email.
Da die Kommentare nur an die Email gesendet werden, ist mir dieser Fehler entgangen.
Ich habe vor einiger Zeit all die unnötigen turnlanes:turns entfernt die ich in OSM erstellt habe.
lg

Hallo AndiLeni,
OsmAnd erstellt nicht automatisch einen Name.
ich habe hier eine Bushaltestelle mit OsmAnd erstellt und es wurde nicht automatisch ein Name eingetragen.

Wenn du auf "POI erstellen" in den obersten Feld keinen Name eingibst, sondern nur in "Benutzerdefiniert" die Bushaltestelle auswählst, wird auch kein Name erfasst.

hier kannst du die Bushaltestelle ansehen:
node/4511373239/history
ich habe sie wieder entfernt da ich sie nur aus Testzwecken erstellt habe.
lg

Please reed this comment and fix the relation/4108738
changeset/26524377

Hi nogajun,
please use "bridge:name" and not "bridge_name".
Some months ago the Japanese community have decided to use only "bridge:name".
please no longer use "bridge_name".
regards

Hi morinaga,
please use "tunnel:name" and not "tunnel_name".
Some months ago the Japanese community have decided to use only "tunnel:name".
please no longer use tunnel_name.
regards

Hallo,
ist der Flurname wirklich "Steinrutsche", oder ist das ein Spielplatz?
lg

Da hast du wohl Recht. Ist ja nicht der Firmensitz von Anjoka.

Ups...hab ich wohl übersehen.
Danke für den Hinweis.
changeset/42302398

Hi,
mein Fehler.
Danke fürs korrigieren und für die Info.

Please stop using name=NK on buildings.
If you dont know the name dont use the name tag. If there is a shop inside, make a extra point and add the information about the shop.
Here a link to find out how to add data to OSM: osm.wiki/Map_Features
if you wil add the address to this buildings, please use addr:housenumber
osm.wiki/Addresses

the key name is only for the real name. if you wil add the address to this buildings, please use addr:housenumber
osm.wiki/Addresses

the key name is only for the real name. if you wil add the address to this buildings, please use addr:housenumber
osm.wiki/Addresses