Changes to Cherry Flat Rd corrupted admin. boundaries for Bonshaw, Delacombe, Buninyong District and Wendouree District. I have repaired these.

This makes a single member relation. Overly complex for such a simple thing.

I would:

Copy the tags of the relation.

Paste them onto the way.

Delete the relation.

Delete the tag on the way that says type=multipolygon. done.

Back then all we had was imagery .. and not as good as it is now. Much better off now. In another 10 years???

Hi,

The extension to Way: Tianjara Fire Trail (132062232) looks to be a cliff line rather than a trail.
Looking at the LPI base map and imagery seems fairly clear to me.

Excellent... after informing you, I found over 250 errors of my own :( .. all fixed.

Don't use relations.

Put a simple way around the outside of it all, tag that building=yes (or something more specific). This can have the overall height, address, name etc.

The bit of the building that is 'different' from the rest - used a simple way on that bit .. tag it building:part=yes (or something more specific). This should have the bits that are different height or other things.. if you don't know just leave it as building:part.

Sorry but that does not work either. multiploygon outers should not touch.

Use simple ways - no relation.

building:part=*

Hi,
Same problem 'part' is not recognized by relations of type multipolygon.

Suggest using https://tools.geofabrik.de/osmi/?view=areas&lon=147.21387&lat=-31.88315&zoom=6 to scan for them...

Hi,

Same problem ...
The role 'part' is not recognized by a relation of the type multiplication.

Hi,
relation/9690980 ... has problems.

First the role 'part' is not recognized by a relation of the type multiplication.

I think you want a building part? In which case a way around the outside of the building. Then a way inside that, for the higher bit of it.

Hi
This has damaged a roundabout way/48849792 see way/48849792

Hi,
This has damaged way/48274092.
See node/613383578

Hi
highway=road means you don't know what it is.
Use the LIP base map as that helps distinguish between tracks, secondary etc.
I have changed these 2 to something I think is appropriate. Where tree cover is in the way the Base Map may be a good guide as to where the road goes. And it indicates gates too.
Take a look at what I have done with these 2 roads.

Note this is NOT a state forest boundary, it should be an area of trees according to the tags present. As such be LPI Base Map should not be used.

Problems
1) The multipolygon is not closed.
2) Ways intersect -way 520285437 with way/392923702
3) Ways intersect -way 520285437 with way/392923710

Hi,
Suggestion... Placing the boundary on the road leads to others 'improving the road' but ignoring the boundary, leading to the boundary being broken.
I don't thing the boundary follows the centre line of the southern side of Winterfold rd where it is one way. It probably follows an approximation of the centre line of the old rd before it was split into 2 one way sections? A simple clean way, not attached to the roads could be drawn from one node where Winterfold rd intersects the present eastern north south run to the western Carrington St detail might serve well?
In the mean time I have connected the boundary trough the roundabouts on Winterfold rd.

Done. The others are within camp sites .. but the camp site boundaries are 'unknown' - so best approximations taken there.

Arr .. a very few of these are single pitches within campsites.. for some reason (tired?) I failed to recognize that the thing was applying the previous tags to these nodes...
There are some 12 that I'll need go through and check, not all of them will be this changeset but never the less good to check them anyway.

Umm why did I do that???

There is at least one other just south of here too.. Node: Banyande Bay (4314168629) from the same changeset.

I shall investigate .. thanks.

Lakeside school moved to Coral Crescent - the correct location as per school web site and LPI Base Map.