OpenStreetMap logo OpenStreetMap

Changeset When Comment
171703944 about 2 months ago

Hi again.
The reason you added a layer to this building was wrong. This building, like many other tall (high) buildings are not placed on their footprint. This is the place where the building meets the ground.

Keep an eye on complex buildings. Especial the high rise (multi story) buildings and buildings which shows their sideviews as well. Check this footage how to map these buildings
https://www.youtube.com/watch?v=dsfUcslLtVc
https://drive.google.com/file/d/13RTwH7sChRWrG5bIjysF2ripBgh3F5l4/view?usp=sharing

Best regards and keep mapping

171703944 about 2 months ago

Hello. Thanks for mapping.
Please do not add a layer to a building to hide errors.
Best regards

173738724 about 2 months ago

Hello. Thanks for mapping.
A few issues.
First, solve the issues shown by the issue triangle of IDeditor before you upload your work.
Your mappings are not that accurate as we might expect. Buildings not squared. Building nodes connected to other buildings or roads.

Keep an eye on complex buildings, Especial the high rise (multi story) buildings and buildings which shows their sideviews as well. Check this footage how to map these buildings
https://www.youtube.com/watch?v=dsfUcslLtVc
https://drive.google.com/file/d/13RTwH7sChRWrG5bIjysF2ripBgh3F5l4/view?usp=sharing

Best regards and keep mapping

172441536 about 2 months ago

Hello. Thank you for mapping on this project.
Please tag buildings as building=yes because that is standard for OSM tagging of building. From the Imagery we cannot see what the purpose is of a building.
Best regards and keep mapping

173313161 about 2 months ago

Hi. Another issue
Images are taken under a certain degree so you see both the roof and a siding.
A gable roof has a bend at its highest point. Map this roof as a single rectangular object because, when viewed from directly above, the roof is rectangular.
Best regards

173313161 about 2 months ago

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
All issues shown by the error triangle should be solved before you upload your mappings.

A: Inaccurate mapping.
B: Overlapping buildings.

C: Collecting adjacent buildings and mapped it as 1 building.

D: Connecting Nodes to other features.

E: Buildings not squared or rounded.
G: Included the shadow of the building.
High building(s) incorrect mapped.
Check this footage how to map high buildings

https://youtu.be/dsfUcslLtVc?si=yH6eWDbsb_ILAVb9
Or See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S

172319480 about 2 months ago

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Please solve the issues shown by the issue triangle on Ideditor.
A: Inaccurate mapping.
C: Collecting adjacent buildings and mapped it as 1 building.

E: Buildings not squared or rounded.
High building(s) incorrect mapped.
Check this footage how to map high buildings

https://youtu.be/dsfUcslLtVc?si=yH6eWDbsb_ILAVb9
Or See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S

171712187 about 2 months ago

Hello. Thanks for mapping.
About mapping and tagging highways.
A schort local connecting road between 2 other roads is never a secundary highway. At best an unclassified highway.
Check the wiki about tagging highways.

osm.wiki/Japan_tagging

Best regards

171711418 about 2 months ago

Hello. Thanks for mapping.
Please square each rectangular building with the Q key while still selected.
Best regards and keep mapping

170447696 about 2 months ago

We welcome you as a new mapper.
Thanks for your contribution to this project.
Please keep these comments in mind when you adress next mapathlon.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping.
E: Buildings not squared or rounded.
G: Included the shadow of the building.

Do not add a layer to a building to hide an error. Just place the building on the correct place, or adjust the road a bit.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S

173561131 about 2 months ago

Hello again.
These mappings are far below par as well.
See my comments on your mappings.

173607634 about 2 months ago

Hello again.
Also, these mappings are very inaccurate.
Buildings need to be tagged as building=yes. Not building=house !
Best regards

173610402 about 2 months ago

Hello.
Very inaccurate mapped.
Map more precise and square each rectangular building please.
Best regards

173642158 about 2 months ago

Hello . Thanks for mapping.
A remark. You mapped a narrow white spot close to a mapped building as a building. What you mapped, was a sidewall rather than a building itself
Check this footage about mapping of buildings with visible sidewalls.

Keep an eye on complex buildings Especial the high rise (multi story) buildings and buildings which shows their sideviews as well. Check this footage how to map these buildings
https://www.youtube.com/watch?v=dsfUcslLtVc
https://drive.google.com/file/d/13RTwH7sChRWrG5bIjysF2ripBgh3F5l4/view?usp=sharing

Best regards and keep mapping

173641422 about 2 months ago

Hello. Thanks for mapping.
Please do not map a whole plot as a single building. Just map each building individually.
Best regards and keep mapping

173641451 about 2 months ago

Hello. Thanks for mapping.
You tend to oversize the round buildings.
Please stay within the roofline.
Best regards and keep mapping

173640716 about 2 months ago

Hello. Thanks for mapping.
You tend to oversize the round buildings.
Please stay within the rooflines.
Best regards and keep mapping

173639962 about 2 months ago

Hello. Thanks for mapping.
Please square each rectangular building with the Q key while still selected.
And, be more precise in mapping round buildings. You tend to oversize these.
Best regards and keep mapping

173632377 2 months ago

See my comment on the other changeset.
Best regards

173631655 2 months ago

Hello. Thanks for mapping.
I review your work because I was validating on the 27165 project and noticed your (sorry to say) poor mapping quality. Here the same. Connected nodes to eachother. Buildings not squared
Please improve your mapping skills !!
Best regards