Hello. Thanks for mapping.
You just mapped 1 building (hut) out of many. Far oversized. Stay within the outlines of the hut when you draw a triangle and make it round,
Best regards

Hello again.
Most buildings here are round huts.
Please map them accordingly

Check this site
https://learnosm.org/en/hot-tips/tracing-round-buildings/
Best regards

Hello, Thanks for mapping.
Please map a round hut in line with the mapping method.
https://learnosm.org/en/hot-tips/tracing-round-buildings/
Your mapping here is far oversized and not rounded.
Best regards and keep mapping

Hello again
Here you make it yourself difficult.
Just map here 3 rectangular buildings rather than following the visible rooflines. The Imagery is taken from a certain angle, so your view is a bit confusing.
Check this page
way/1385515599/history#map=19/19.739199/96.223167
Best regards

Hello. Thanks for mapping.
A small remark.
When you want to map a building, partly hidden by trees, just extrapolate the roofline rather than following the tree line.
Check this page .
way/1384555318/history#map=19/19.738834/96.223548

Best regards

Hello. Thanks for mapping.
A remark. On the lower part of this task (494) you mapped buildings with a serious offset !
Please be keen on mapping on the correct place.
Best regards

Hello. Thanks for mapping.
Please, when you map buildings, please map them correct over the whole roofline and position them correctly as well.
Did you copy-paste many buildings ? If so, check that they cover the correct image.
Best regards

Hello. Thanks for mapping on this project.
A remark about recognizing a building or a walled plot or courtyard.
You mapped a few courtyards/walled plots as a building.
Sometimes difficult to recognize.
When an object shows walls, with on both sides a shadow (on the inside of what might be a building) It is mostly just a walled yard or plot.
Buildings don't show a shadow on the sunny side of a roof.
There is often a courtyard inside the building. You can then create a multipolygon to show the courtyard.
Best regards

Hello. Thanks for mapping.
Please map more accurate, square the buildings and be sure all buildings are mapped.
Best regards and keep mapping

Hello. Thanks for mapping.
Please map each building individually without connecting the nodes.
(see the instructions)
Best regards

Hi. I did not see the borderline .
Will map the balance
Best regards

Hello. Tanks for mapping.
Don't tag highways as a hedge.
Hedges are clearly visible as a dark line. Highway are visible as a light trace.
Best regards

Hello. Thanks for mapping.
Please leave a gap in a fence where a road is crossing it. Now it blocks a route when you use GPS nav systems.
Best regards

Hello. Thanks for mapping.
A few remarks.
Check the highway wiki to get an idea how to tag traces of paths/roads in this area
osm.wiki/Highway_Tag_Africa?source=post_page---------------------------
A footway is a dedicated path within towns or parks. Not here.
Tracks are also not to be tagged in this rural area. (path or unclassified highway is better)
Best regards and keep mapping/

Hello. Thanks for mapping.
You added fences without proof of a fence. They can be identified as a (intermitted) black line, often next to a path.)
Highways her are mostly paths, ( <2 mtr) or unclassified highways. Read the highway classification wiki how to tag tracks, roads etc.
Check this wiki how to tag highways in this area
Best regards and keep mapping

Hello. Thanks for mapping.
Please pay more attention to accurate mapping. You overlooked also the reported issues which had to be solved before you upload your mappings. 87 buildings out of 237 mapped buildings are not squared.

Best regards

Hello. Thanks for mapping.
How did you manage to map already mapped buildings on this task ?
Were mapped march 20 2025
29 buildings !
Best regards

check this webpage to see your mappings and the modifications I had to made.
https://overpass-api.de/achavi/?changeset=166530028
Check the legend for explication.
Best regards

Hello.
Please improve your mapping skills.
Your mappings are below par and need to be improved.
Best regards

Hello. Thanks for mapping.
About High buildings.
You've mapped several times a building as 3 separate buildings.2 x different levels as 2 buildings
1 x a siding as 1 building.
Check this guide to see how these buildings ought to be mapped.

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Best regards