Hello. Thanks for mapping.
When you map waterways, please check the flow directon.
Best regards

Hello. Thanks for mapping.
When you map a trace to the border of your task, continue a bit over the edge. A mapper on an adjacent task can pick it then up and continue mapping. Otherwise, he will not see it.
Best regards

Hello. Thanks for mapping.
Please improve your knowledge about tagging buildings.
Buildings should be tagged as building=yes. Area-yes is not correct
When you map a highway, try to connect them to other highways.

Best regards

Hello. Thanks for mapping.
Please check your knowledge how to tag waterways. You tagged this as a canal !
This is a natural area where rivers and streams are flowing.
Also, the highways you mapped are incorrect tagged
Check your knowledge about tagging of highways
You tag small paths as a connecting highway
Check these webpages
osm.wiki/Highway_Tag_Africa
This is about Tanzania but also valid here
https://drive.google.com/file/d/1SxLkCU3IRecsFV2kYx61VImJLLtQiKw3/view?pli=1
And, where waterways crosses highways, add a node and tag it as a ford. bridge or culvert.
Best regards

Hello. Thanks for mapping on this project.
You did not tag the crossings highway/waterway, Mostly a ford.
Be sure you connected both waterway and highway when adding a crossing tag.
Best regards

Hello. Thanks for mapping on this project.
You did not tag the crossings highway/waterway, Mostly a ford.
Be sure you connected both waterway and highway when adding a crossing tag.
Best regards

Hello. Thanks for mapping on this project.
You did not tag the crossings highway/waterway, Mostly a ford.
Be sure you connected both waterway and highway when adding a crossing tag.
Best regards

Hello. Thanks for mapping.
I don't know how you managed it, but you mapped the same waterway twice within 10 minutes. See changeset/163606606
I corrected it.
Best regards

Hello again
You did not tag the crossings highway/waterway, Mostly a ford.
Be sure you connected both waterway and highway when adding a crossing tag.
Best regards

Hello. Thanks for mapping.
Please solve the issues shown by the issues triangle before your upload your mappings.
Improve your knowledge about how to tag highways,
You tag small paths as a connecting highway
Check these webpages
osm.wiki/Highway_Tag_Africa
This is about Tanzania but also valid here
https://drive.google.com/file/d/1SxLkCU3IRecsFV2kYx61VImJLLtQiKw3/view?pli=1
Best regards

When a waterway or highway continues over the edge of the task, please map it a bit over the border. The mapper who want to map the adjacent task see it and can continue.
Otherwise it is not visible for him/here.
Best regards

Hello. Thanks for mapping on this project.
Please solve the issues shown by the issue triangle before you upload your mapping.
You did not tag the crossings highway/waterway, Mostly a ford.
Best regards

Hello. Thanks for mapping on this project.
Please solve the issues shown by the issue triangle before you upload your mapping.
You did not tag the crossings highway/waterway, Mostly a ford.
Best regards

Hello. Thanks for mapping.
Please solve the issues shown by the issue triangle before you upload your mappings.
Please improve your knowledge about how to tag highways.
You tagged small local paths in-between farmland as highway=unclassified. Path is a better option.
Check this wiki page
osm.wiki/Highway_Tag_Africa
More detailed (Tagging here is similar as in Tanzania
https://drive.google.com/file/d/1SxLkCU3IRecsFV2kYx61VImJLLtQiKw3/view?pli=1
Best regards

Hello. Thanks for mapping on this project.
Please solve the issues shown by the issue triangle before uploading your work.
I noticed 5 ends of a road which you stopped wrongly. Instead of just stopping you returned a bit and mapped it again over the last part.
When you map a trace till the edge of task which continues over the edge, please map it a bit over the edge, The mapper on adjacent task than can pick it up and can continue.
Please use the same tag when an incoming trace is visible on the edge when you extend that trace.
Best regards

Hello. Thanks for mapping.
You overlooked some water/highway crossings, which should be tagged as a Ford in most cases.
The Issue triangle warns you about that.
Where a waterway runs parallel to a highway, please don't let it cross .
Best regards

Hello. Thanks for mapping.
Please solve the issues shown by the issue triangle before you upload your mappings.
Where a waterway crosses a highway you need to add a tag, describing the type of crossing.
Her, mostly a ford.
Best regards

When you map close to the border, please continue a bit over the border so that it is visible to other mappers.
Best regards

Hello. Thanks for mapping.
Please solve the issues shown by the Issue triangle before you upload your mappings.
Each crossing waterway/highway need to be tagged. Mostly as a ford.
I have my doubts about the culvert you mapped. I see no proof of a culvert. Just a ford might be better.
Check this address on Google Earth
7.4451761 16.5033035
Best regards and keep mapping

check this webpage to see your mappings and adjustments I had to make
https://overpass-api.de/achavi/?changeset=163690978
Best regards
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/163635182