Hello. Thanks for mapping.
Here, you mapped small unidentified objects in ponds and tagged them as a building.
These objects are no buildings.
Don't add a generic nametag 'building 'to a mapping.
I removed them.
Best regards

Hello. Thanks for mapping.
Please realize that this is a building and road mapping only. (read the instructions :-) )
Focus on highways which connects settlements, buildings and villages.
Don't waste energy on mapping traces in between agricultural plots and rural areas, or ending somewhere in the middle of nowhere.
And, water bodies are also not part of the project.
Best regards

Hi. Most common option is that it becomes a building, so construction= building.
You can also opt for * being a wildcard.
I hope this clears the situation
Best regards

Hello. Thanks for mapping. Good job.
about buildings under construction:
This is the correct tagging;
building=construction
construction=building.
Check this wiki
building=construction

Best regards

Hello Thanks for mapping.
Please add the tag construction=building to a building under construction.
Best regards

Hello. Thanks for mapping.
Please don't map objects which show a shadow. A shadow proofs that the object is above ground level. thus, mostly a building.
Best regards

btw. Please map no land use areas. TM is not a good tool to facilitate land use mappings, because you are limited by the task squares. Landuse areas not.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/158320179

Hello. Thanks for mapping.
Please realize that this is a building and road mapping only. (read the instructions :-) )
Focus on highways which connects settlements, buildings and villages.
Don't waste energy on mapping traces in between agricultural plots and rural areas, or ending somewhere in the middle of nowhere.

This means that you have to know the width of the trace. Forget narrow paths.

How to measure the width of a trace In Ideditor when you are in doubt of the width.
Command Ctr+shift+M shows the measuring dimensions tab.
After that command, select add line.
Zoom in very far (20 - 25 mtr) so that you have a good view on the shoulders of a road.
Then draw a line between the shoulders.
You can read the value in the measurement tab. (select Metric value)
<2 mtr tag it Path
> 2 mtr tag it unclassified, residential or track depending on the situation.
Delete the line after measuring.
Best regards and keep mapping.
---

Published using OSMCha: https://osmcha.org/changesets/158320179

Hello. Thanks for mapping.
Please realize that this is a building and road mapping only. (read the instructions :-) )
Focus on highways which connects settlements, buildings and villages.
Don't waste energy on mapping traces in between agricultural plots and rural areas, or ending somewhere in the middle of nowhere.

This means that you have to know the width of the trace. Forget narrow paths.

How to measure the width of a trace In Ideditor when you are in doubt of the width.
Command Ctr+shift+M shows the measuring dimensions tab.
After that command, select add line.
Zoom in very far (20 - 25 mtr) so that you have a good view on the shoulders of a road.
Then draw a line between the shoulders.
You can read the value in the measurement tab. (select Metric value)
<2 mtr tag it Path
> 2 mtr tag it unclassified, residential or track depending on the situation.
Delete the line after measuring.

When you come across the edge of a task, and the road continues, map the road a bit over the edge. The mapper who maps the adjancent task will see it and can continu.
btw Most of your taggings in agricultural fields should be tracks rather than unclassified.
Please get yourself familiar with the tagging of highways in India

osm.wiki/India/Tags/Highway#Local_Roads
Best regards and keep mapping.

See my comment on changeset/158365453
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/158365190

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
D: Connecting Nodes to other features. (even to a road)

E: Buildings not squared.( those which you connected to other features.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/158365453

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
B: Overlapping buildings.
D: Connecting Nodes to other features.
G: Included the shadow of the building.
H: Included a yard of clearing.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/158365079

Hello. Thanks for mapping.
Please realize that this is a building and road mapping only. (read the instructions :-) )
Focus on highways which connects settlements, buildings and villages.
Don't waste energy on mapping traces in between agricultural plots and rural areas, ending somewhere in the middle of nowhere.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/158316007

Hello. See my comment on changeset/1583464603
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/158364482

Hello. Thanks for mapping.
Please realize that this is a building and road mapping only. (read the instructions :-) )
Focus on highways which connects settlements, buildings and villages.
This means that you have to know the width of the trace. Forget narrow paths.

How to measure the width of a trace In Ideditor:
Command Ctr+shift+M shows the measuring dimensions tab.
After that command, select add line.
Zoom in very far (20 - 25 mtr) so that you have a good view on the shoulders of a road.
Then draw a line between the shoulders.
You can read the value in the measurement tab. (select Metric value)
<2 mtr tag it Path
> 2 mtr tag it unclassified, residential or track depending on the situation.
Delete the line after measuring.
Don't waste energy on mapping traces in between agricultural plots and rural areas, ending somewhere in the middle of nowhere.
Best regards and keep mapping.
---

Published using OSMCha: https://osmcha.org/changesets/158364603

Hello. Thanks for mapping.
The imagery is of a poor quality and bad to map from
You can add the Bing imagery and after correcting the offset you have a better view. Map only buildings which are visible on the Esri imagery, so you have to switch between the imageries.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/158341658

Hello again. See my comment on previous changeset.
Except for 1 correct small building, the round objects don't need to be mapped.
Best regards and keep mapping
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/158339215

Hello. Thanks for mapping
What you see here is crops standing on riders drying. Don't need to be mapped. Are not buildings.
---

Published using OSMCha: https://osmcha.org/changesets/158340076

Thank you for mapping. You have correctly identified the location of most objects and mapped.
However, High building(s) are incorrect mapped. See par 20 chapter About Buildings
Best regards
Reminder: Please be sure to square all rectangular buildings with the Q key
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&amp;t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/158340483

Hello, I reviewed this changeset as well.
Summarized, you need to pay attention on
mapping of high buildings and squaring the buildings.
The Imagery is not the most clear. You can add the Bing imagery as well and after correcting the offset you have a better view.
Best regards and keep mapping
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/158340390