Hello. Thanks for mapping.
Why do you add a layer to a building?
Buildings are build on the ground.
Use the layer tab at buildings only at petrol station roofs with their service road under it or something similar. Not to hide an error.
Best regards

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------

A: Inaccurate mapping.

D: Connecting Nodes to other features.
E: Buildings not squared.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157509899

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
C: Collecting adjacent buildings and mapped is as 1 building.
D: Connecting Nodes to other features.

High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157474711

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
Good work.
You included the shadow of buildings into your mapping. (thick black line) That is not a part of a building !
Best regards

Hello. Thanks for mapping.
Please map more accurate. This is very sloppy mapped.
And, when an object shows no shadow, it is mostly not a building.
I removed 11 mapping.
Best regards

Hello. Thanks for mapping.
Sorry to say, but your mappings are a bit sloppy. Take the time to map accurate. Most buildings have 4 walls !
And, square each building with the Q key when it is still selected.
Best regards and keep mapping

Don't include the shadow of a building, either. (black shadow line)
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/157613312

Hello.
Thanks for mapping.
Please map more accurate and square the buildings you map.
Best regards and keep mapping

Hello. See my comments on another changeset.
Your mappings are very sloppy, and you mapped already buildings for the 2nd time. Please improve your mapping skills.
Zoom in rather far to map more accurate !
Best regards

Hello. Thanks for mapping.
You ought to use the Esri Imagery.
You mapped from Bing, which is older than Esri and not visible on Esri anymore. I removed them
Best regards

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping. Buildings far oversized.
E: Buildings not squared.

G: Included the shadow of the building.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157613161

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------

E: Buildings not squared.
G: Included the shadow of the building.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157613509

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Issues found on your mappings

A: Inaccurate mapping. Buildings far oversized.
D: Connecting Nodes to other features.
E: Buildings not squared.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157613502

Hello. Thanks for mapping.
Default a building is to be tagged as
building-yes. No names please.
Best regards and keep mapping

Thanks for mapping.
Please do not oversize the buildings.
Best regards

Hello. Thanks for mapping.
The default tagging for buildings is
building=yes.
Please square also the buildings you map while they are still selected.
Best regards

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

And. do not cluster buildings.

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. I reviewed your validation job here to check (at random) that the mappings are in line with the HOTOSM quality standards.
A few remarks.
You did not square mappings which needed to be squared. ( about > 60)
Some buildings are still clustered.
Can you solve these issue ?
I put the task back to 'ready to validate.
Best regards and keep mapping
---

Published using OSMCha: https://osmcha.org/changesets/157575105