Hi. About these mappings.
Area mapping is not required on this project.
Just buildings, roads , waterways.
This is an urgent project. Please focus on the required objects.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/148610422

Hi. A remark here.
Big areas mapping is hardly possible within TM4 because that is organized by mapping 1 task at the time.
These kin of mappings should be done on OSM with JOSM or another editor (not Ideditor)
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/148749260

I copy this text to you because it links to several documents which might be of help.

Here you tagged several traces as a highway=classified. Just map 1 trace coming from the west as an unclassified highway + surface=unpaved.
Use highway=path rather than highway=footway.
Only necessary to map these traces when they connect buildings/settlements.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/148750380

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.

Please pay attention to the next summarized issues. (see attached document with examples for more info)
Buildings not accurate mapped and show an offset.
Use Bing imagery.

buildings not squared.

Don't you use the building plugin ?

Some buildings need to be mapped again.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/148916846

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
Buildings need to be mapped as building=yes.

Not all buildings accurate mapped.

Many buildings not squared

Many buildings connected to each other by nodes.

Lot of buildings overlapped each other

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/148817849

Hello. Thanks for mapping.
Please be more accurate at buildings with extensions. You often just draw a rectangular.
About tagging highways.
Narrow traces (<2mtr) are no residential highways but Paths. Please map them
with that tag,
How to measure the width of a road in IDeditor:

Ctrl+⇧ Shift+M – toggle measurement panel Draw a line between the shoulders of a trace (zoom in very far) and read the distance.
Best regards

Hello. Thanks for mapping.
Please read the highway wiki how to tag traces. You used 'footway' which is primary to be used as sidewalks or in park areas. Not in rural areas.
Just highway=path is sufficient.
Where paths cross each other, connect them with the nodes.
About the buildings. Don't forget to square them
Best regards

Hello. Thanks for mapping.
Please check the width of a trace before you decide how to tag it. You tagged many traces as a highway=unclassified instead of highway = path
traces < 2 mtr should be tagged as path

How to measure the width of a road in IDeditor:
Zoom in as far as possible and draw a line between the shoulders of a trace and click
ctr +shift+M to shows measurements
click on the line between the nodes, and you get the width.
Best regards

Hello. Thanks for mapping.
About tagging of highways:
Narrow traces , <2 mtr, should be tagged as path.
Best regards and keep mapping

Thank you for mapping. You have correctly identified the location of most objects and mapped . However, Buildings are often not squared.

Reminder: Please be sure to square all rectangular buildings with the Q key
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&amp;t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/148530042

Hi. A few more points.
Connect highways to eachother where it is obvious.
About buildings. Map more accurate please and square your buildings.
Best regards

Hello. Thanks for mapping on this task.
A few remarks about mapping and tagging of highways.
A: Tracks never connect roads with houses .Use path narrower than 2 mtr.
unclassified for other roads
service, where a single road only gives access to a farm, building or factory/quarry
In rural areas, the tag residential is not to be used.
Please read the highway wiki. Link in the instructions.
Best regards and keep mapping

Hello. Thanks for mapping
You tagged roads as highway=road, which is too generic.
Here, the most commonly used tags are:
traces <2 mtr wide: tag highway=path.
Other in rural areas : highway=unclassified.
Residential tag; only to be used in villages /towns
I adjust the taggings on this changeset.
Please use the correct tag in future mappings.
Be sure to connect parts of highways to each other with a node.
Please follow the outlines of a building precise. You mapped just a rectangular where buildings show an extension.,
and don't forget to tag each building
Best regards and keep mapping

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.

The tagging of highways is often not correct.
f.i. Tracks within farmland are paths or track, never unclassified.
When a trace is meandering through the landscape, and surrounded by green, it is mostly a stream or a river, like here.
Residential highways are not to be mapped in rural areas.
How to measure the width of a road in IDeditor:

Ctrl+⇧ Shift+M – toggle measurement panel Draw a line between the shoulders of a trace (zoom in very far) and read the distance.

About tagging of roads: Narrow traces (<2 mtr = path) should be tagged as path, others as unclassified when you are mapping in rural area
Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/148856317

Hello. Thanks for mapping.
Please extend and connect paths/roads to each other where a trace is visible.
Use the correct tag, <2 mtr wide= path. others which connects settlements, unclassified.
This webpage might be helpful as well

osm.wiki/User:Bgirardot/West_African_HOT_Mapping_Tips
Best regards

Hello. Thanks for mapping.
When you map roads and they cross other roads/paths, don't forget to connect them with a node.
Best regards and keep mapping

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
Buildings not squared.
Nodes of building connected to other features (road)
highway crosses over another highway.
As far I can see, you mapped many objects outside the project area. Please stay on the task you are mapping on.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/148407419

Hi, No need to reopen and correct it. Has been done during the validation process.
Best regards and keep mapping.

Hello.
you tagged a complete stream as layer= -1 and as a ford.
Select only the crossing node and tag it then.
Best regards

Hello. Thanks for mapping.
Please solve the issues, reported by the issue triangle, before you upload your mappings.
When you map highways which should continue over the edge of your task square, please map it a bit over the edge, The mapper who will map the adjacent task can pick it up and continue.
Best regards