Hello. I reviewed this task as well.
Here you collected multiple buildings as 1 building.
Each building need to be mapped individual.
Best regards and keep mapping.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/137410745

Thanks for your contribution to this project. We welcome you as a new mapper.
This changeset is reviewed by a Global Validator.
I realize and expect no perfect mappings from a new mapper, however, I am sorry to say, but your mappings do not meet the quality standards of HOTOSM.
Please pay attention to next summarized issues. ( see attached document for more info)
A: Not accurately drawn.
B: Overlapping buildings.
D: Connecting nodes of buildings to other buildings or features like roads and residential areas.
The Image quality is not of great help, but map and square each building !

Explanation can be found on this document what might be helpful to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping !
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/137409820

Hello. Thanks for mapping.
About tagging of highways
Please read and follow the tagging rules on this linked document.
Decision tree, which tag to be used for roads
https://drive.google.com/file/d/1S48CEVi3yiAYWhIJu57jtLyv0ZVUbGwJ/view?usp=share_link
osm.wiki/East_Africa_Tagging_Guidelines
or
osm.wiki/Highway_Tag_Africa

--------------------------------------
Tag highway=Path rather than footway/ Paths are usually impassable for motorised vehicles. (However, African motorcyclists can sometimes do the most improbable stunts.) Never use path to mark an unpaved or unsealed road in built-up residential areas: Such roads should be tagged according to the local conventions (usually highway=residential if passable by vehicles and pedestrians, or highway=footway for pedestrian only where they can sometimes be separated from another parallel highway for vehicles).
----------------------------
How to measure the width of a road in IDeditor:
Zoom in as far as possible and draw a line between the shoulders of a trace and click
ctr +shift+M to shows measurements
click on the line between the nodes, and you get the width.
Best regards

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator.
I am sorry to say, but your mappings do not meet the quality standards of HOTOSM.
Please pay attention to next summarized issues. ( see attached document for more info)
A: Not accurately drawn.
B: Overlapping buildings.
C: Collecting multiple buildings and mapping them as 1 building.
* Tagging of buildings. For HOTOSM projects, the standard tagging is 'building=yes' No text adding. Please keep that in mind at further mappings.

Explanation can be found on this document what might be helpful to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping !
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/137820697

Thank you for mapping. You have correctly identified the location of a number of objects and mapped. You marked this task as complete mapped. However, you overlooked buildings. Please continue mapping. I invalidated the task

Reminder: Please be sure to square all rectangular buildings with the Q key
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
On this document you will find some hints and tricks which might help to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/137823625

Thank you for mapping. We welcome you as a new mapper.
You have correctly identified the location of most objects and mapped.
A few issues. You mapped a few buildings very weird by following the tree lines. Please extrapolate the rooflines of those buildings. They are mostly strict rectangular.
I corrected them.
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
On this document you will find some hints and tricks which might help to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/137821743

Hello. Another issue
Please do not map landuse objects. These landuse objects covers mostly bigger areas than a task square. Therefore, we don't map them on projects organized on Tasking Manager.
Best regards
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/136972770

Thank you for mapping.
We welcome you as a new mapper.
You have correctly identified the location of most objects and mapped. However: Please be sure to square all rectangular buildings with the Q key
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
On this document you will find some hints and tricks which might help to improve your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/136972770

Hello, Thanks for mapping>
You added the tag paved to a track.
A track is by default unpaved and to be used in farmland etc.
Best regards

Hello. Thanks for mapping.
Please do not tag layers to a highway in order to hide errors. Solve the error instead please.
Best regards

Hello again.
You tagged highways as paved. despite they are not. Please check the surface of a highway. Sandcolored is unpaved or ground.
Best regards

About tagging of highways
Please read and follow the tagging rules on this linked document.
Decision tree, which tag to be used for roads
https://drive.google.com/file/d/1S48CEVi3yiAYWhIJu57jtLyv0ZVUbGwJ/view?usp=share_link
osm.wiki/East_Africa_Tagging_Guidelines
or
osm.wiki/Highway_Tag_Africa

--------------------------------------
Tag highway=Path rather than footway/ Paths are usually impassable for motorised vehicles. (However, African motorcyclists can sometimes do the most improbable stunts.) Never use path to mark an unpaved or unsealed road in built-up residential areas: Such roads should be tagged according to the local conventions (usually highway=residential if passable by vehicles and pedestrians, or highway=footway for pedestrian only where they can sometimes be separated from another parallel highway for vehicles).
----------------------------
How to measure the width of a road in IDeditor:
Zoom in as far as possible and draw a line between the shoulders of a trace and click
ctr +shift+M to shows measurements
click on the line between the nodes, and you get the width.
Best regards

Hello, Thanks for mapping.
Please don't add a layer tag to a building to hide an error because you overlapped another building. Just correct the outlines of those buildings.
Best regards

Hi again.
I reviewed many mappings and removed lots of them because the traces on the ground are barely visible.
You mostly tagged a trace as an unclassified highway. Please read the info I gave you. Mostly they could be tagged just as path.
No problem, this issues are common made by new mappers.
See this page where I made adjustments.
https://overpass-api.de/achavi/?changeset=137687594
See the legend for info.
Best regards and keep mapping

Hello. Thanks for mapping on this project.
We welcome you as a new mapper.
Please get yourself familiar with taggings of highways.
About tagging of highways
Please read and follow the tagging rules on this linked document.
Decision tree, which tag to be used for roads
https://drive.google.com/file/d/1S48CEVi3yiAYWhIJu57jtLyv0ZVUbGwJ/view?usp=share_link
osm.wiki/East_Africa_Tagging_Guidelines
or
osm.wiki/Highway_Tag_Africa

Check and solve the issues on the issue triangle before you upload your mappings.
Best regards

Hello. Thanks for mapping on this project.
When a highway you are mapping crosses other highways, you need to connect those nodes. otherwise a navigation system don't see the crossing.
About tagging of highways
Please read and follow the tagging rules on this linked document.
Decision tree, which tag to be used for roads
https://drive.google.com/file/d/1S48CEVi3yiAYWhIJu57jtLyv0ZVUbGwJ/view?usp=share_link
osm.wiki/East_Africa_Tagging_Guidelines
or
osm.wiki/Highway_Tag_Africa

Best regards

Hello. Thanks for mapping.
--------------------------------------
Tag highway=Path rather than footway/ Paths are usually impassable for motorised vehicles. (However, African motorcyclists can sometimes do the most improbable stunts.) Never use path to mark an unpaved or unsealed road in built-up residential areas: Such roads should be tagged according to the local conventions (usually highway=residential if passable by vehicles and pedestrians, or highway=footway for pedestrian only where they can sometimes be separated from another parallel highway for vehicles).
----------------------------
How to measure the width of a road in IDeditor:
Zoom in as far as possible and draw a line between the shoulders of a trace and click
ctr +shift+M to shows measurements
click on the line between the nodes, and you get the width.
Best regards

Hello. You have been noticed that you left some errors. Where a highway crosses a railway, you need to add a level crossing. Not supervised. no barrier.
When you see a warning: disconnected highway, you need to solve that by connecting the nodes to that highway.
Best regards

Hi . Another issue.
Don't connect nodes of any highways to other features like landuse, railways, buildings.
Best regards

Hello. Thanks for mapping on this task. We welcome you as a new mapped.
Please solve the issues shown by the issue triangle before you upload your mappings.
Please do not tag a trace in an industrial area (1 company) as a residential highway. Highway=service is a better tag.------
Please read and follow the tagging rules on this linked document.
Decision tree, which tag to be used for roads
https://drive.google.com/file/d/1S48CEVi3yiAYWhIJu57jtLyv0ZVUbGwJ/view?usp=share_link
osm.wiki/East_Africa_Tagging_Guidelines
or
osm.wiki/Highway_Tag_Africa
Best regards