Hello Marte90. Thank you for mapping on this project. I am reviewing tasks before svalidating them. You have done a good job. I have a remark on your mapping here. Please be more accurate in following the outlines of buildings. In a number of occasions you tend to oversize a building or misplace a building. Keep also a sharp eye on courtyards. They are no part of a building. A last remark. Always square your mapped rectangular building with the S key
Best regards and keep mapping

Hello Elisa
hanks you for mapping on these projects.
I review mapping work before validating.
You mapped quite a lot of buildings here. Please keep in mind that the black areas alongside a building mostly are shadows of the buildings. Do not include them in your mapping. You tend to map buildings somewhat oversized. Please do follow the outlines more precise.
Best regards and keep mapping

Hello Arenow. Thanks you for mapping on these projects. You mapped quite a lot of buildings here. Please keep in mind that the black areas alongside a building mostly are shadows of the buildings. Do not include them in your mapping. try to avoid to map a few buildings as 1.
Best regards and keep mapping

Hello. Back again with another issue.
When you map buildings which are build rather close to each other, pleas leave a small gap between them (and square it) and do not let the nodes join. We have to disconnect them each to be able to square that building, as well as removing the leftover nodes which first connected the buildings
Best regards

Hello Cameron Yell
hanks for mapping on this project. I review tasks before validating them and have a remark
Please square all ! your rectangular buildings. (you missed 26 out of 104) and, when you see a dark spot alongside a building, it is mostly the shadow of a building. Please do not include that in your mapping.
Best regards and keep mapping

Hello Kiradraws1. Thanks for mapping on this project. I review tasks before validating them and have a remark
Please square all ! your rectangular buildings. (you missed 70 out of 516) and, when you see a dark spot alongside a building, it is mostly the shadow of a building. Please do not include that in your mapping.
Best regards and keep mapping

Hello Anumula. Thanks for mapping here.
I am validating tasks and give feedback on common made errors. You mapped quite a lot of buildings, however, forgot to square 33 of them. Please square each rectangular building with the S key. Please let nodes of adjacent buildings not connect together. keep a little space between them.
Last point. You called this task as complete mapped. However, there were still a number of buildings to map,
Best regards and keep mapping

Hello. Thanks for mapping here.
I am validating tasks. I noticed that you do not always square your buildings. Most buildings are build rectangular. sometimes partly hidden by trees. Try to extrapolate in those cases the walls of the building
Best regards and keep mapping

Hello Walter. Thanks for mapping here.
I validate tasks and noticed that you did not square lots of buildings. (78 out of 99 mapped buildings.) The majority should be squared as most buildings are build rather rectangular. Pleas map buildings, which are partly hidden by trees by extrapolating the walls and square each rectangular building with the S key in iDeditor.
Best regards and keep mapping

Hallo, nog even dit. De meeste gebouwen zijn rechthoekig, Als ze omringd zijn door bomen, volg dan niet de bomenrand maar extrapoleer de wand van het gebouw onder de boom. Bedankt

Hallo Femke. Bedankt voor het mappen hier
Ik valideer taken en adviseer mappers over fouten die veel voorkomen. In jouw mappings zie ik dat je gebouwen strak tegen elkaar tekent. Probeer een kleine opening ertussen te houden zodat je het gebouw ook vierkant kan zetten.
Verder prima werk. Succes verder met mappen

Hello Walter. Thanks for mapping here.
Please try to square (S key in iDeditor) the buildings you have mapped as much as possible ( most buildings are build rectangular and sometimes partly hidden by trees
Best regard

Hi Roihim, Thanks for mapping. I am validating tasks and have a question.
You mapped several objects as 'reservoir covered' Do you have local knowledge about these objects ? a few objects shows a shadow what for me an indication is that it might be a building.
Best regards

Hallo Peter, Bedankt voor het mappen hier.
Een opmerking. Graag aandacht besteden aan het correct aan elkaar verbinden van wegen. Ik ben een aantal "losse eindjes"tegen gekomen, waarbij het lijkt of de nodes "connected' zijn, maar net niet. Bedankt alvast

Hi Richard. Thanks for mapping here.
A request. When you map highways to a hamlet etc. and other highways are also ending on the same hamlet, please do connect the nodes to each other. Important for GPS driven navsystems.
Thanks and keep mapping

Hi Guido, Thanks for mapping here. A remark. In a number of occasions I noticed that you did not connect nodes of highways to each other / or stopped just before joining another highway. It is important that highways are connected where possible. (GPS driven navsystems cannot handle gaps in highways) .
Please take that in mind next mappings.
Best regards and keep mapping

Hello Jake, Thanks for mapping on this task.
A remark. You mapped a piece of highway= tertiary which seems rather a path than a serious highway. please refresh your knowledge about tagging Highways in East Africa
see this WIKI
osm.wiki/East_Africa_Tagging_Guidelines
Best regards and keep mapping

Hallo Aapdesign. Geen taken invalideren aub. Zie instructies. Zelf zaken oplossen.

groeten

Dag Adrie. Ik controleer taken alvorens ze te valideren. Een opmerking.
Ik zie dat je een smalle weg < 3mtr tagt als unclassified. Path zou meer van toepassing zijn. Raadpleeg deze wiki nog eens
osm.wiki/East_Africa_Tagging_Guidelines

Vriendelijke groeten

Hi pe1klc. I check tasks before validating them and noticed your mappings of highway=unclassified. Please review your knowledge of the highways here
osm.wiki/East_Africa_Tagging_Guidelines
The tag path should be preferred here.
Best regards and keep mapping