hello. Thanks for mapping.
Please map more accurate and square each rectangular building.
Don't add a layer to a building to avoid issues. In Ideditor you cannot move highways out of its place, so we (validators) will do that.
Best regards

Hello. Thanks for mapping.
Please solve the issues shown by the Issuetriangle before you upload your mappings.
Check this video as well on how to build
buildings with a few floors, start watching from 1 minute.
https://youtu.be/Tpi-BTMVo1M
Best regards

Hello. Thanks for mapping.
Please do not copy incorrectly mapped buildings to other spots (they are so equally mismapped that I think you copied them). Map more accurately by following the rooflines precisely.
Square each rectangular building as well.
Quality prevails above quantity!!
And solve the issues flagged by the issue triangle.
Best regards

Hello. Thanks for mapping.
Please check this video
Mapping buildings with a few floors, start watching from 1 minute.
https://youtu.be/Tpi-BTMVo1M

Hello, thanks for mapping.
Please do not map buildings as a residential area. Buildings Building=yes!
Be more accurate and do not connect or cross other objects.
Best regards, and keep mapping.
Check this out:
See this video.
For buildings with a few floors, start watching from 1 minute.
https://youtu.be/Tpi-BTMVo1M

On this task, the high-rise buildings are often incorrectly mapped.
You can see both one or more side walls and the roof. The imagery is taken under a certain angle, so you can see more .
Often all visible walls and roofs are mapped as 1 building.
The correct way is to map the roofline and move the whole object on their footprint.

See this video.
For buildings with a few floors, start watching from 1 minute.
https://youtu.be/Tpi-BTMVo1M
https://youtu.be/dsfUcslLtVc?si=bEHwRl1sxDI_GA0H

Best regards

Hello. Thanks for mapping.
Please map only required objects. Buildings and highways.
Best regards

Hello. Please check this video about higher buildings.
For buildings with a few floors, start watching from 1 minute.
Best regards

Hello. Thanks for mapping.
Please check this footage on how to map

See this video.
For buildings with a few floors, start watching from 1 minute.

Hello.
You mapped a building with a gabled roof along the visible roofline. However, the imagery shows a building from an angle, so the roof seems to not have a rectangular form. Just map them as a rectangular building.
Check this webpage.
way/1454215161/history
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/175207949

When you see that a borderline of the residential are crosses buildings, move that line just outside the build area.
Best regards
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175208453

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping.
D: Connecting nodes to other features.
E: Buildings not squared or rounded.
G: Included the shadow of the building.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175208453

Thank you for mapping. You have correctly identified the location of most objects and mapped.
However, Follow the roof line precisely, even where a roof recesses or there is an extension.

Reminder: Please be sure to square all rectangular buildings with the Q key
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175208779

Here you connected nodes of buildings to a residential landuse borderline. Move that line to a place where it does not cross buildings.
Best regards
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175207780

Hello. See my previous comments on a changeset.
Another issue. You regularly include the shadow of a building. These are no part of the building !
Best regards
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175208554

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------

A: Inaccurate mapping.
C: Collected adjacent buildings and mapped it as 1 building.
D: Connecting nodes to other features.
E: Buildings not squared or rounded.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175208784

Thank you for mapping. You have correctly identified the location of most objects and mapped.

Reminder: Please be sure to square all rectangular buildings with the Q key
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175208089

Thank you for mapping. You have correctly identified the location of most objects and mapped.

Reminder: Please be sure to square all rectangular buildings with the Q key
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175208787

Thank you for mapping. You have correctly identified the location of most objects and mapped them.

Reminder: Please be sure to square all rectangular buildings with the Q key
Please do not include a shadow of the building.
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175208144

Thank you for mapping. You have correctly identified the location of most objects and mapped them.

Reminder: Please be sure to square all rectangular buildings with the Q key
Please do not include a shadow of the building.
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175208144