repair Suez Canal centreline - wrongly divided and section badly tagged tunnel=culvert,layer=-1 under a road bridge - now re-combined as it was

repair Stuart Creek wrongly divided and part falsely set as tunnel=culvert,layer=-1 under road bridge by ch. 145875657, and also moved an admin boundary node

repair section of Dhünn wrongly divided and falsely tagged with tunnel=culvert,layer=-1 under road bridge

repair sections of Seine centreline wrongly divided and set as tunnel=culvert,layer=-1 under 2 bridges

repair Vardar centreline - incorrectly divided and part under footbridge wrongly set as tunnel=culvert,layer=-1

repair Varder centreline - incorrectly divided and part under footbridge wrongly set as tunnel=culvert,layer=-1

repair ferry route ways falsely divided at 2 bridges with wrong tunnel=culvert section under those bridges, from changesets 146692158, 146691996. Sorry about large changeset extent, is due to 2 of repaired ferry way lengths

reverse wrong division of Yarra centreline at 5 bridges removing sections falsely marked as tunnel=culvert,layer=-1 restoring original river way (and boundary way) extents and nodes

add bridge area, ensure bridge=yes,layer=1 set consistently on bridge and not adjacent. set layer=-1 on culverted drain to W of bridge. remove tunnel under bridge, stream is on surface, track is covered by bridge.

remove false tunnel=culvert under bridge, add layer=1 on bridge fences, correct 2x "stop" to ordinary give way

correct demolished vs preserved areas: Boots gone, Grade II* listed former Express entrance lobby and office corner preserved, within reconstruction site

improve RAF plaque actual position near Strand entrance way. improve consistency of building line, alignments.

add oneway exit only on end of resid road to junction. add foot connections and improve alignments.

road continues, no longer construction, from later imagery

section of road speed limit reduced from 40 to 30mph from survey. improve newer roads and buildings, add foot connections, from imagery

temporary store now removed

fix some more cracks / extremely near nodes between buildings/parts

resolve as many as possible of the tiny cracks between buildings and building:part edges as can find (may be some left). correct relative height of one tower where clearly wrong from photos/visual survey

restore (presumed) accidental node drags of service way and power line. fix bad added building shapes and improve other shapes/alignments

fix misalignments, mis-connected ways. add roofed areas on platforms